SEATEC Solder Connectors with Shrink Tubing Assortment / pack of 60

Quick and easy:
No more laborious soldering and crimping! These shrink sleeves contain solder, which you can melt quickly and easily using a heat gun. This gives you a secure and reliable connection in a matter of seconds. Simply slide the heat-shrink tubing onto one side of the cable, then twist both cable ends and heat the heat-shrink tubing evenly with a heat gun. The transparent sleeve lets you see exaclty what you're doing for the most precise join. The operating temperature of the heat gun should be between 400 and 450 °C. Shrinkage ratio 3:1.

The set contains the following solder connectors:

20x red 0.5-1.5 mm² (AWG 22-18)
20x blue 1.5-2.5 mm² (AWG 16-14)
20x yellow 4-6 mm² (AWG12-10)

Ideal for confined spaces:
Thanks to their flexible design, the connectors can also be used in narrow and hard-to-reach areas. Forget tedious crimping or soldering in confined spaces - with these solderless connectors, connecting wires is a breeze.

Higher water resistance:
Two integrated waterproof hot-melt adhesive rings ensure an optimum seal and prevent the ingress of moisture. This means your cable connections are reliably protected even in damp environments.

High temperature resistance:
The high-quality materials guarantee that the heat-shrink tubing only melts after the soldering process. This gives you a secure and strong connection that can withstand high temperatures.

Tip:
During the shrinking process, hold the heat gun at a distance of 3-5 cm from the shrink tubing.