The PICCOLO 5 is based on Whisper power's proven genverter technology. The system consists of a powerful diesel generator and an external PMG inverter. The inverter stabilises the power generated by the efficient Permanent Magnet generator to a pure sine wave voltage and thus ensures the correct output voltage for the connected appliances operated with alternating current, regardless of the set speed. This technology makes these genverters more compact and lighter than conventional diesel generators. Indirect water cooling (sea or fresh water) ensures optimum cooling of the motor and the Permanent Magnet. The motor has been developed by Whisper Power themselves and thus meets these special requirements precisely. The result is first-class performance with low fuel consumption and low emissions.
Optimum noise insulation
All PICCOLO generators come with a soundproof housing, which provides optimum noise insulation. The cover can easily be removed for maintenance work. A custom-made vibration damping system also ensures that they are not only quiet, but also vibration-free.
Easy installation
Kits are available separately to make installation easy, which contain all the components needed. Plus, the compact design means it can be installed in even the tightest of spaces, only a small amount of ventilation is required.
Features
- Permanent magnet for extreme efficiency
- Automatic speed control according to load
- Powerful PMG inverter
- Sine wave output 230V / 50 Hz
- Extremely compact, light and low-vibration
- Very low noise
- Indirect water cooling (sea or fresh water)
- Easy to install - all connections pre-assembled
1. Injector
2. Decompression lever
3. Cold start lubricating plug
4. Oil filler cap
5. Air filter housing
6. PM generator cover
7. Fuel pump
8. Air inlet
9. Rpm control
10. Oil dipstick
11. Name plate
12. Oil strainer
13. Oil pressure switch
14. Untreated water pump (rain water)
15. Exhaust gas temperature switch
16. Exhaust gas system
17. Fuel supply
18. Fuel return line
The following diagram shows a rough overview of all the parts needed to install the generator, which must be purchased separately:
- Whisper Power Generator
- Syphon Breaker Kit
- Water Inlet Kit
- Fuel Kit
- Fuel Line Hose
- Water Lock / Exhaust Kit
- Cooling Water / Exhaust Gas Separator Kit
- Sea cock (Ball Valve with Hose connection)
- Rubber Exhaust Hose
- Battery switch
- Starter battery
Technical Data
| Nominal power |
3.5 kW |
| Continuous output |
4.4 kVA / 3 kW |
| Output voltage/ frequency |
230 V / 50 Hz |
| Noise level |
54 dB(A) at 7 m / 65 dB(A) at 1 m |
| RPM range |
2800-3600 RPM / automatic |
| Generator |
Permanent Magnet Alternator (PMA) |
| Efficiency |
94% |
| Harmonic distortion |
< 5% |
| Peak output for 2 sec |
200% |
| Frequency tolerance |
± 0.1% |
| Motors |
Whisperpower WP1 |
| Number of cylinders |
1 |
| Capacity |
309 cc |
| Air consumption |
0.42 m³/min |
| Engine cooling |
Indirect watercooling |
| Fuel |
Diesel |
| Fuel consumption |
0.8-1.2 l/h |
| Starting |
Electrical - 12 Volt |
| Starter battery |
12 V, 55 A (optional) |
| Battery charger function |
Provided by the PMG |
| Genverter dimensions (H x W x D) |
520 x 450 x 470 mm |
| Genverter dry weight |
68 kg (incl. GRP sound insulation) |
| Dimensions WP-PMG (H x W x D) |
436 x 207 x 151 mm |
| WM-PMG weight |
7.6 kg |
| Operating temperature |
-10 to +40° C |
| Storage temperature |
-20 to +70 °C |
| Protection category |
Motor part / electronic part: IP21 |
| Max. Operating angle |
25º in all directions |
| Wet exhaust |
Ø 40 mm |
| Oil filler neck |
Top and side |
| Included in delivery |
Diesel generator,
PMG inverter,
standard start/stop panel,
fuel pump,
12 m connection cable |