YACHT DEVICES NMEA0183 Multiplexer

Intelligent multiplexer with five NMEA0183 inputs and one SeaTalk1 input. The multiplexer automatically detects the data speed on each port and can be easily configured using a hidden switch. The device also has flexible filters, routing schemes and supports software updates.

The device has six pre-configured settings with different port speeds and routing schemes. You can easily switch between the six presets using a paper clip. The six configuration presets can be found in the English manual.

The inputs can be routed to themselves (pre-set 6), so you can use the device as a NMEA amplifier, network extension or buffer.

You can also set the multiplexer individually, each preset can be changed. Connect the multiplexer to a PC to do this.

Features:

• 5x NMEA 0183 inputs (2 x TX / RX, 1 x TX / RX with galvanic isolation 2500 VRMS)
• 2x NMEA0183 outputs
• 1x SeaTalk input (multiple devices can be connected)
• Both NMEA0183 protocols are supported (RS-232 and RS-422)
• NMEA inputs can be configured between 300 and 115,200 baud, automatic speed detection is also possible
• Bi-directional data exchange between SeaTalk1 and NMEA0183, with autopilot support
• Individual filters on all inputs for incoming and outgoing data
• "Tunnel" mode for connection to Navtex devices or other older devices