In-Hull Transducer Fitting

SVB item number: 16016
Avoid a hull passage! The in-hull transducer fitting fits the 150 kHz oscillator by EchoPilot or NASA. Suitable for interior installation on plastic boats with solid laminate.
Product details
only  €39.95
Shipping information: Dangerous goods
available | in stock
pcs.
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
MyBoat
Are you already using this item?
Add to my boat now.

Product data

  • SVB item number 16016
  • EAN 4050269017369
  • Description In-hull transducer fitting
  • Accessories for Transducers
  • Shipping information Dangerous goods

Product details

In-hull transducer fitting, fits the 150 kHz oscillator by EchoPilot or NASA. Only suitable for interior installation on plastic boats with solid laminate. With the internal installation of the transducer, drilling the hull is avoided and the transducer can not be damaged by floating debris or similar objects. Length: 85 mm, inner diameter: 45 mm, open diameter for shaft: 15 mm. Oil comes included with this unit.

 

Our tips for the proper assembly of this unit:

First, you must provide voltage to the display device and connect it to the transmitter. Next, you must hold the transmitter in a water-filled plastic bag until a stable depth reading is achieved. Now, the final tuning of this device can be performed. However, if no stable depth reading can be successfully achieved, you should choose a breakthrough assembly instead.

Documents

en-flag Manual
.PDF (526,34 KB)
Item 13392

Product safety

Please note the following hazard warnings:

Hazard pictograms
Signal word
Warning
Hazard warnings
Keep out of reach of children.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
P102, P261, P273, P280, P305+P351+P338, H315, H319, H317, H411

What other SVB customers have to say

100% real reviews
Wolfgang Z.
by Wolfgang Z. Flag of Austria 8/3/2018 Verified purchase Variant: 16016
Product ok, resin does not harden
The product would be fine if the resin dried with hardener. Still liquid after 48 hours at an average of 23. Then I completely removed the resin and glued the sleeve to the fuselage with epoxy. Was rock hard in 1 hour!
Brault P.
by Brault P. Flag of France 7/12/2017 Verified purchase Variant: 16016
No instructions in French. The glue did not take and I lost all the oil. I had to buy a new product. I will use an epoxy glue found in another store and test the seal before putting the oil.
Our answer
Bonjour Mr,

La notice en français se trouve directement sur la page article.

Cordialement
L'équipe SVB
Michael M.
by Michael M. Flag of Germany 8/18/2015 Verified purchase Variant: 13392
It has served its purpose. Although the glue was still not completely dry after two days.
Andreas L.
by Andreas L. Flag of Germany 5/20/2012
Mixing nozzle for 2-component adhesive and lock nut were missing. Lock nut was delivered as soon as possible on request.
Bernhard P.
by Bernhard P. Flag of Germany 4/7/2011
The product description is missing a reference to the content. So oil and glue are included. But it is important that the 2nd plastic nut for the oscillator is missing. You need this to securely fasten the transducer to the screw cap at the appropriate height in the tube.
SVB should fix that.

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

No questions asked yet. Be the first to ask a question!

More "Customers ask customers" available in the following languages

E-mail Newsletter

Product news, offers & new guide videos. Stay up to date!

WhatsApp

New: Get news from SVB straight to your phone!

In-Hull Transducer Fitting
View Ratings (60) Questions (13)