YACHTCARE Anchoring Antifouling
SVB item number: 50701
Manufacturer no.: 155.663
This 2-component primer is intended for use on areas under the waterline and is the ideal solution for painting new antifouling onto existing older antifouling. With this intermediate layer, new coatings can be applied without first having to remove the old antifouling layers. Only suitable on existing self-polishing or hard antifouling. Product details
Recommended retail price:
€57.30
only
€49.95
(€66.60 / L)
-13%
You save: €7.35
Shipping information:
Dangerous goods
available
| in stock
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Product data
- SVB item number 50701
- EAN 4102871556634
- Manufacturer no. 155.663
- Description YACHTCARE - Anchoring antifouling
- No. of components 2 components
- Area of application Hull, Below water
- Method of application Roller
- Osmosis prevention No
- Overcoating intervals See data sheet
- Colour Grey
- Contents 0.75 l
- Yield (theoretical) 5.25 m²
- For substrate Existing antifouling
- No. of coats (recommended) 2 - 3
- Shipping information Dangerous goods
Product details
This 2-component primer is intended for use on areas under the waterline and is the ideal solution for painting new antifouling onto existing older antifouling. With this intermediate layer, new coatings can be applied without first having to remove the old antifouling layers. Only suitable on existing self-polishing or hard antifoulings.
Characteristics:
Characteristics:
- Mixing ratio: base: hardener 2: 1 by volume
- Over apply interval: min. 4 hours / 20° C / max. 12 hrs
- Coverage: approx. 7.0 m² / liter
- Colour: grey
Documents
Datasheet
PDF (199,22 KB)
Safety datasheet
PDF (645,08 KB)
Safety datasheet
PDF (430,79 KB)
Safety datasheet
PDF (429,69 KB)
Safety datasheet
PDF (644,93 KB)
Product safety
Please note the following hazard warnings:
UN number
UN 1263
Transport class
3
Hazard pictograms
Signal word
Danger
Hazard warnings
Caution! Hazardous respirable droplets may be produced when spraying. Do not inhale aerosol or mist.
Dispose of contents/container to …
Contains epoxy constituents. May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Store in a well-ventilated place. Keep cool.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
Causes serious eye damage.
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
May cause drowsiness or dizziness.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
Dispose of contents/container to …
Contains epoxy constituents. May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Store in a well-ventilated place. Keep cool.
If skin irritation or rash occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapours/spray.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Keep out of reach of children.
Causes serious eye damage.
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
May cause drowsiness or dizziness.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Harmful to aquatic life with long lasting effects.
EUH211, P501, EUH205, P101, P403+P235, P333+P313, P305+P351+P338, P310, P280, P271, P260, P210, P102, H318, H226, H315, H317, H336, H335, H373, H412
Customers ask customers
No questions asked yet. Be the first to ask a question!
More "Customers ask customers" available in the following languages
Customers also bought
YACHTICON
PURYTEC Water Additive
only
€16.95
(€169.50 / L)
Blackwater Hoses
from
€16.95
4 variants
Sanitation Hose with Barrier Layer
from
€24.95
3 variants
TRUDESIGN
Ball Valves
from
€50.95
7 variants
NMEA2000
Network Cable / Micro-C
from
€31.95
6 variants
NMEA2000
Starter Kit / Micro-C
only
€133.95
> 100
PL Connector for RG213
only
€3.70
> 100
Splice online
LIROS
HANDY ELASTIC Mooring Line / blue
from
€1.95
7 variants
Assemble online
-6%
PHILIPPI
STV 108 Series Switchboard / configurable
€178.00
only
€167.95
11
Similar items
-17%
SEATEC
PLASMOTEC One-Component Underwater Primer
€23.95
from
€19.95
(€26.60 / L)
2 variants
-18%
SEATEC
EPOTEC Epoxy Primer
€33.95
from
€27.95
(€37.27 / L)
2 variants
INTERNATIONAL
PRIMOCON One-Component Primer and Barrier
from
€29.95
(€39.94 / L)
2 variants
INTERNATIONAL
INTERPROTECT Two-Component Epoxy Primer
from
€34.95
(€46.60 / L)
4 variants
INTERNATIONAL
GELSHIELD 200 Two-Component Epoxy Primer
from
€35.95
(€47.93 / L)
4 variants
INTERNATIONAL
2-Component VC TAR2 Epoxy Primer
from
€44.95
4 variants
INTERNATIONAL
B-FREE TIECOAT 2-Component Primer
from
€39.95
(€53.26 / L)
2 variants
INTERNATIONAL
B-FREE CONVERSION COAT 2-Component Primer
only
€34.95
(€46.60 / L)
HEMPEL
LIGHT PRIMER High Performance Two-Component Epoxy Primer
from
€25.95
(€70.14 / L)
5 variants
HIGH PROTECT II Two-Component Epoxy Primer
from
€109.95
(€43.98 / L)
2 variants
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!