Is in 2 shopping baskets right now, grab yours now!
This sturdy 2D diesel air heater from Autoterm Air is perfect for smaller boats due to its compact size. Adjusting power levels and temperature is child's play. Maximum heating output: 2.0kW. Voltage: 12V. Supplied with control unit and bracket. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings.
Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP
address. Please also check your browser for updates.
This sturdy 2D diesel air heater from Autoterm Air is perfect for smaller boats due to its compact size (under 7.5 m / we recommend the 4D for larger boats). The digital control panel (including temperature sensor) makes it extremely easy to adjust power levels and temperature. The air heater is certified (e2) and can be installed without registration. The hole dimensions are identical to those of the popular Webasto or Erberspächer heaters, so it is easy to replace without having to drill new holes. Delivery includes an altitude kit and all the components needed for installation.
The heater's cable harness features a gate input for connecting your own remote control or other secondary control unit. You can choose whether the connection is made via ON/OFF switch or pulse. The advantage of the latter means that it is possible to operate the heater with different controllers. For example, you can switch on with a remote control or a push-button and later adjust power levels or even switch off from your bed using the included control element.
In addition, the air heater is equipped with a so-called altitude kit. Thanks to this altitude kit, the heater automatically reduces the quantity of fuel injected depending on the ambient air pressure. This prevents or drastically reduces the likelihood of the combustion chamber from clogging with carbon particulate in the event of a falling air oxygen content.
Maintenance is not normally necessary. However, to prolong service life the combustion chamber must be allowed to get really hot from time to time to burn off any residues. As a rule, running the heater at full power for at least half an hour once every week or every two weeks is enough to allow the combustion chamber to reach full temperature again.
Supplied with new control unit
The new Comfort Control boasts a modern design and numerous functions, such as three adjustable timers, extended heating modes, fan functions and much more. The intelligent thermostat function, for example, automatically switches the heating on when the temperature falls below a set number and similarly turns it off once a set temperature is reached. Multifunctional rotary knob with grippy rubber coating and OLED display. Small installation dimensions, easy to use, stylish design. Temperature sensor included.
Technical Data
Voltage
12 V
Current consumption (watts)
10 - 29 W
Heating capacity
0.8 - 2.0 kW
Airflow rate
34 - 86 m³/h
Fuel consumption
0.10 - 0.24 l/h
Hot air pipe
60 mm
Dimensions (LxHxT)
330 x 120* x 120 mm
* + 25 mm for the connections
Weight of the heater (without accessories)
2.90 kg
NOTE:
Included
12 V heater
Comfort Control unit
Autoterm fuel pump
Exhaust silencer (170 x 90 x 50 mm)
Dosing pump rubber holder
Dosing pump wire harness
Heater wire harness
Intake air hose with integrated silencer
Heat protection hose
End piece exhaust pipe + clamp
Tank intake pipe
5.5 m fuel line
Fuel line connector
1 m corrugated metal exhaust pipe
Screws, nuts, brackets, heat shrink tubing, cable ties
Instruction manual
Bracket
Features
Discover the features that make this product stand out. From technical details to special
functions – we’ve summarized all the key information for you.
The heater has only been installed for two months, but so far it is doing an excellent job. The exhaust pipe included in the set is rather short. The suction through the diesel feed pump is also a little cumbersome.
All in all, I am very satisfied and can recommend the product.
I installed this heater in a van fitted out on a Ducato L4. It heats very well even in negative. It uses very little fuel. In elec, 7A on ignition then 1.5 to 3A depending on the ventilation. On the other hand, the mounting bracket sold separately is essential for a clean and safe assembly. Very disappointed with the control command, the wheel works very badly and the panel comes off its support as soon as you touch it. It's really cheap so what is still sold 90 € alone! Count a good working day to install it.
Contrary to other information, the Autoterm does not fit on the Webasto mount. Definitely not on the old Air Top 32 that we replaced. Otherwise, I would have been happy to hear that the supplied cable for the control unit, at 1.8m, is probably far too short for any boat. Would have saved me an extra lap.
The product description states that the Autoterm fits well as a replacement device for Webasto. Unfortunately, there is no information about which Webasto model. I had a Webasto HL 32 and it has completely different connections and fixings. The display of the control unit is unfortunately a little crooked in its housing. The fan makes a humming noise. Everything is still bearable but a little annoying. The price-performance ratio is still very good.
Helpful?
by
Jürgen E.
11/27/2019
Verified purchase
Variant:
42915
Hello Joonas, Autotherm produce in the Ukraine. The supply of spare parts works pretty well, because the most parts are in stock of German wholesaler. Yours SVB-team.
Autotherm has production in Ukraine. The supply of spare parts works pretty smoothly because almost everything can be obtained promptly from the German wholesaler.