Element 12 HV / buttons / with Hypervision Chirp Sonar and HV-100 transducer

Smart 12" multifunction display with user-friendly interface and integrated GPS antenna. A classic keypad and the Raymarine LightHouse Sport interface make for intuitive operation. With built-in HyperVision sonar technology for outstanding image quality of the underwater world. The fast QuadCore processor is more than adequate for mapping and continuous 3D rendering. HV-100 transducer included.
Raymarine Quantum Radar The Raymarine Quantum radar antenna can be connected to the ELEMENT-S via the integrated WiFi interface. Raymarine QUANTUM is the next generation of marine radar antennas with CHIRP technology. The QUANTUM provides razor-sharp images over both short and long distances.

NMEA2000 Support
With the NMEA2000 (Micro-C) interface you can clearly display AIS, tank, engine, compass and wind data. This allows you to view incoming AIS targets directly on nautical charts and keep an eye on the surrounding shipping traffic. With the help of the data bar you can monitor your current tank levels for instance.

HyperVision 1.2 MHz Sonar Technology
HyperVision sonar technology uses top frequencies of up to 1.2 megahertz and CHIRP technology. This allows for a much higher image resolution compared to other systems. The top frequency of 1.2 MHz can reach a range of up to 30 meters at a beam angle of 180°. Use it to bring DownVision, SideVision and RealVision 3D imaging to a new level and to see structures, underwater vegetation and fish in photo-like clarity.
With the standard 350 kHz CHIRP sonar, you can receive high-resolution images at a range of up to 183 meters (DownVision) and 91 meters (SideVision / RealVision 3D). In addition, the classic CHIRP sonar operates at 200 kHz down to a depth of 274 metres.

Raymarine LightHouse Sport

Intuitive and visually striking user interface. Thanks to pre-configured home screens, every user has the start screen needed for his or her needs immediately at hand.
Thanks to the ergonomically positioned buttons, navigation through the menus and placing waypoints and routes is quick and easy even without a touchscreen. Through an NMEA2000 interface, the Element-S can display a wide range of data from external devices such as AIS receivers or tank sensors.

Your own nautical charts with RealBathy
With the new RealBathy function you can create your own nautical charts. Simply activate the function and your Element multifunction display with sonar function will create the nautical chart of your area. You can determine the overlay and display safety depths. Insert a large enough memory card into your device to do so.

Technical Specifications

Screen size	12"
Touchscreen	Non-Touch
Screen resolution	1280x800
Brightness	1500 Nits
Network and compatibility
GPS	Integrated GPS / GNSS receiver: GPS / GLONASS
Sonar	CHIRP Sonar, DownVision (Standard and Hyper), SideVision (Standard and Hyper), Realvision 3D (Standard and Hyper)
Sonar connection	15-pin HyperVision ™ connector
Sonar depth	CHIRP sonar = 274 m (900 feet) DownVision ™ Standard = 183m (600ft) | DownVision ™ Hyper = 30m (100ft) SideVision ™ Standard = 91 m (300 feet) | SideVision ™ Hyper = 30m (100ft) RealVision ™ 3D Standard = 91 m (300 feet) | RealVision ™ 3D Hyper = 30m (100ft)
Nautical charts specification
Supported nautical charts	Raymarine LightHouse NC2, Navionics, C-MAP Essentials, C-MAP 4D MAX + and all charts listed on the Raymarine Chart Store.
Waypoints routes	10,000 waypoints / 200 waypoints groups / 150 routes with max 250 waypoints / 16 tracks - 10,000 track points per track
Other specifications
Interfaces	NMEA2000-Limited (engine, tank sensor & compass data input, data output: GPS for radio), Wi-Fi, Bluetooth For NMEA2000 GPS and AIS data update free of charge to the current Element Lighthouse Version 3.9. More information can be found on the Raymarine support page.
Dimensions	357 x 215 x 62 mm
Nominal voltage	12V DC (8V - 16V DC)
Current consumption	25 W
Water resistance	IPX6 and IPX7
Operating temperature	-25 ° C to + 55 ° C
Includes	Mounting bracket with fixings, surface mounting kit with fixings, sun shade, 1.5 m power / NMEA2000 cable, documentation, HV-100 transducer with 6 m cable transom mount with mounting parts, P-clips with mounting screws, cover plate with mounting parts

Depth / fishfinder views
Depending on the optionally connected transducers, the chartplotter can display the following depth views. The pure depth display refers to transducer data received via an NMEA0183 or NMEA2000 interface. Some functions can be retrofitted via external modules.

Pure depth representation	Fishfinder / CHIRP	Down vision	RealVision 3D

Compatible with:

Charts module:

SD / Micro SD	CompactFlash	C-Card MAX orange	C-Card NT + black

Compatible with the following nautical charts:

C-MAP 4D	C-MAP 4D Full	C-MAP 4D Continental	Navionics +	Navionics Platinum +

Nautical charts features:

Chart system	Vector maps	Raster / paper charts	Easy- / AutoRouting	Tide display	Satellite images	High-resolution depth lines
C-MAP 4D
C-MAP 4D Full
C-MAP 4D Continental
Navionics +
Navionics Platinum +