HEMPEL HEMPASPEED TF Biocide-free Thin-film Antifouling

SVB item number: 51941 Manufacturer no.: 77222
Hempaspeed TF from Hempel is a high-performance, thin-film, biocide-free coating for the underwater area of your boat. It not only protects your vessel, but also the environment. This underwater paint forms an ultra-smooth surface that minimises growth and protects against corrosion. Ideal for inshore waters, rivers and lakes as well as freshwater areas with light fouling conditions. Product details
only  €39.95 (€53.26 / L)
Shipping information: Dangerous goods
available | in stock
pcs.
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
MyBoat
Are you already using this item?
Add to my boat now.

At a glance!

Product data

  • SVB item number 51941
  • EAN 5709516027697
  • Manufacturer no. 77222
  • Description HEMPEL - Hempaspeed TF
  • Antifouling type Thin film antifouling, Biocide-free
  • Colour White
  • Colour code 10101 Ultimate White
  • Contents 0.75 l
  • Area of application Fresh water
  • Hull material GRP, Steel, Aluminium
  • Method of application Roller, Brush
  • No. of coats (recommended) 2 - 3
  • Yield (theoretical) 8.25 m²
  • Immersion after 30 h @ 15 °C
  • Max. time before immersion 3 months
  • For the Netherlands Yes
  • For Denmark Yes
  • Boat type Sailboat, Motorboat
  • Typical shelf life 3 Years
  • Shipping information Dangerous goods

SVB recommends

Image of 2-Component Conversion Primer
HEMPEL 2-Component Conversion Primer
from €42.95 (€57.26/ l)

Accessories

Image of Disposable Gloves / latex / 100 pcs.
-20%
Disposable Gloves / latex / 100 pcs.
only €19.95
Image of Disposable Gloves / vinyl / 100 pcs.
Disposable Gloves / vinyl / 100 pcs.
only €20.95
Image of LIGHT PRIMER High Performance Two-Component Epoxy Primer
HEMPEL LIGHT PRIMER High Performance Two-Component Epoxy Primer
from €25.95 (€70.14/ l)
Image of Thinner 808 (No. 3)
HEMPEL Thinner 808 (No. 3)
only €17.95 (€23.93/ l)
Image of Comfort Respirator Mask
3M Comfort Respirator Mask
only €38.95
Image of Protective Overall
3M Protective Overall
from €15.95
Image of Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
3M Masking Tape TOP TAPE / beige / 18 mm / 24 mm x 50 m
from €3.10 (€0.06/ m)
Image of Priming Flat Brush 30 mm / 40 mm / 50 mm / 70 mm
Priming Flat Brush 30 mm / 40 mm / 50 mm / 70 mm
Image of Paint Roller for 1 part and 2 part paints / Antifouling and primer
-16%
Paint Roller for 1 part and 2 part paints / Antifouling and primer

Product details


Hempaspeed TF from Hempel is a high-performance, thin-film, biocide-free coating for the underwater area of your boat. It not only protects your vessel, but also the environment. This underwater paint forms an ultra-smooth surface that minimises growth and protects against corrosion.

Sustainability meets the latest technology
The newest technology combines the best of thin-film coatings and hard antifouling with a patented hydrogel formula. The result is a high-performance hybrid antifouling that is completely biocide-free. It forms an extremely smooth surface that significantly minimises resistance, and is extremely easy to clean with no chemicals. Thanks to these environmentally friendly properties, Hempaspeed TF is ideal for inshore waters, rivers and lakes as well as freshwater areas with light fouling conditions and can also be used in the Netherlands. especially for areas where restrictions do not allow use of biocides.

Compatible boat and hull types
Hempaspeed TF can be applied to regatta sailing boats, racing boats and trailer boats and other pleasure boats with GRP, steel or aluminium hulls.

Highly versatile
With the Conversion Primer (available separately), Hempaspeed can also be applied to existing antifouling. Hempel's Conversion Primer is a two-component epoxy resin and, thanks to its extremely thin layer, adheres even to antifouling products containing Teflon, such as International's VC17m.

Hinweis!
Biocide-free antifouling is a green alternative to chemical antifouling. Unlike biocide-containing antifoulings, biocide-free antifouling does not kill marine organisms such as algae and mussels, but makes it more difficult for growth to adhere. Regular cleaning of the hull is necessary to ensure that biocide-free antifoulings can effectively prevent fouling to take hold. The use of biocide-free antifoulings is advisable in waters with low or medium fouling levels, for example in freshwater or cooler waters.

Further features at a glance
  • Easy to process
  • Suitable for high speeds
  • Ideal for light fouling conditions and inland waters.
  • No risk of run-off contamination when washing
  • Application method: brush/roller
  • Immersion after 30 h @ 15 °C
  • Max. 3 months before immersion
  • Yield approx. 11 m²/litre
  • Thinner: 808

Here you will find the required primers
Hempel Light Primer
Hempel Conversion Primer

Documents

en-flag Brochure
PDF (1,23 MB)
en-flag Datasheet
PDF (263,08 KB)
en-flag Safety datasheet
PDF (174,04 KB)
Item 51943, 51944
en-flag Safety datasheet
PDF (172,96 KB)
Item 51947, 51948
en-flag Safety datasheet
PDF (161,33 KB)

Product safety

Please note the following hazard warnings:

Contains biocides
No
UN number
UN 1263
Transport class
3
LQ weight
5 l
VOC content
537.8 g/l
Hazard pictograms
Signal word
Warning
Hazard warnings
IF INHALED:
Call a POISON CENTER or doctor/physician if you feel unwell.
Store locked up.
Store in a well-ventilated place. Keep container tightly closed.
Dispose of contents/container to …
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
Do not breathe dust/fume/gas/mist/vapours/spray.
Collect spillage.
Flammable liquid and vapour.
May cause respiratory irritation.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
P304, P312, P405, P403+P233, P501, P102, P101, P210, P271, P273, P260, P391, H226, H335, H336, H411

What other SVB customers have to say

100% real reviews

20 customer reviews

4.3 (out of 20 ratings)
  • Advantages
  • Colour (16)
  • Yield (theoretical) (17)
  • Price/performance ratio (15)
  • Processing (17)
  • Effect (11)
  • Drying time (6)
  • Disadvantages
  • Price/performance ratio (2)
  • Effect (3)
  • Opinions
  • Place of use : Baltic Sea (2)
  • Place of use : Inshore waters (6)

Customer images (8) from all reviews

Ute A.
by Ute A. Flag of Germany 1/23/2024 Variant: 51941
Very satisfied
We've driven it for two seasons now. Repainted once in the second season and hardly any growth in both years. We will repaint it again this spring. Area is IJsselmeer and Wadden Lake. Clear recommendation, finally you no longer have to constantly have to polish yourself on the dinghy or on your body when you get to the underwater ship.
  • Advantages
  • Colour
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
  • Effect
Michael J.
by Michael J. Flag of Germany 10/8/2023 Variant: 51941
Good effect even under changing conditions
The processing took place in spring 2023. According to the manufacturer's instructions, a layer of conversion primer and then 2 layers of Hempaspeed TF were applied to the old AF. The sailboat was sailed in different waters during the season, fresh, brackish and seawater, and was also parked for long periods of time. When the crane was removed in the fall, there were only small traces of slimy growth, which could be completely washed off even with light equipment (hose and sponge). A neighbor had significantly more vegetation with "conventional" AF (however, the age of its AF is unknown).
The layer thickness appears to have been halved, so a new layer will be applied in the coming WL.
  • Advantages
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
  • Effect
Sönke D.
by Sönke D. Flag of Germany 7/17/2023 Verified purchase Variant: 51944
from now on biocide-free
underwater painting
  • Advantages
  • Colour
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
  • Effect
Heinrich K.
by Heinrich K. Flag of Germany 5/9/2023 Verified purchase Variant: 51943
Fast and fair
Very easy to work with. Fast delivery, fair price
  • Advantages
  • Colour
  • Yield (theoretical)
  • Price/performance ratio
  • Processing
Hans-Peter R.
by Hans-Peter R. Flag of Germany 4/28/2022 Verified purchase Variant: 51948
Everything OK
I can only say something in 2 years, looks good

Rate product

How would you rate this product?
Disappointed
Completely fails to meet my expectations
Poor
Only some expectations are met
OK
Meets my basic expectations
Good
Slightly better than my general expectations
Excellent
Fully exceeds my expectations
Click on the stars to rate

Customers ask customers

No questions asked yet. Be the first to ask a question!

More "Customers ask customers" available in the following languages

E-mail Newsletter

Product news, offers & new guide videos. Stay up to date!

WhatsApp

New: Get news from SVB straight to your phone!

HEMPEL HEMPASPEED TF Biocide-free Thin-film Antifouling
Colour White
Contents 0.75 l