SUNBEAM Solar Module TOUGH G8 Performance 82 W / 82 W / semi-flexible / 778 x 540 x 3 mm
SVB item number: 35161
Manufacturer no.: TP8-78X54
SUNBEAMsystems Tough G8 Performance solar modules deliver higher output than comparable models in the Tough series and, thanks to their highly efficient SUNPOWER cells (25.2% efficiency), provide a reliable source of energy even under the most challenging conditions. Measuring just 3 mm thick, these semi-flexible modules can be installed almost flush with the surface thanks to the absence of junction boxes. The 8th generation of these shade-optimised panels features an improved 5-layer structure. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
SUNBEAM
Solar Module TOUGH G8 Performance 39 W / 39 W / semi-flexible / 378 x 535 x 3 mm
only €239.00
To product
SUNBEAM
Solar Module TOUGH G8 Performance 116 W / 116 W / semi-flexible / 1060 x 540 x 3 mm
only €679.00
To product
Product data
- SVB item number 35161
- EAN 7331898066698
- Manufacturer no. TP8-78X54
- Description SUNBEAMsystems - Solar module Tough G8 Performance 82 W
- Construction type Semi-flexible
- Nominal Power @ 12 V 82 W
- max. Power Current (Imp) 3.9 A
- max. Power Voltage (Ump) 21.12 V
- Short circuit current (Isc) 4.36 A
- Open circuit voltage (Uoc) 24.52 V
- Connector None
- Attachment Adhesive
- Module connection Rear side
- Connector cable Flat cable (2-core)
- Walkable Yes
- Length 778 mm
- Width 540 mm
- Height 3 mm
- Installation type Deck, Firm substrate
- Weight 1.5 kg
- Daily yield in summer (Northern Europe) 246 - 328 Wh/Day
- Daily yield in summer (Southern Europe) 328 - 410 Wh/Day
- Use of light Monofacial
Product details
SUNBEAMsystems Tough G8 Performance solar modules offer higher output than comparable models in the Tough series and, thanks to their highly efficient SUNPOWER cells (25.2% efficiency), provide a reliable source of energy even under the most challenging conditions. Due to their impressive technical specifications, Tough Performance modules are frequently used in the yachting and caravan sectors, as well as in domestic and industrial systems.
The modules are supplied with a full-size 3M adhesive tape; as a result, they do not have any eyelets for fastening.
Higher efficiency and performance
The SUNBEAM Tough G8 Performance Series offers more power than comparable models in the SUNBEAM Tough Series. The Tough+ series features high-quality SUNPOWER cells, which increase the modules’ overall efficiency to 25.2%.
5-dimensional layer system
The improved surface finish of these modules is extremely durable and resistant to high levels of UV radiation. The material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. In addition, the shock-absorbing layer has been improved; this protects the solar cells and the cabling and helps to extend the system’s lifespan.
Flushed Soft Junction Box
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)
With rear-side module connection via an inconspicuous, 2-core flat black connector cable. The cable can be glued to dark surfaces / mounting surfaces next to the module, almost so that it is barely visible.
Details at a glance
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. For modules with a connection box, these are usually integrated in the connection box.
Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. "In-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.
Technical Data
Installation instructions
The modules are supplied with a full-size 3M adhesive tape; as a result, they do not have any eyelets for fastening.
Higher efficiency and performance
The SUNBEAM Tough G8 Performance Series offers more power than comparable models in the SUNBEAM Tough Series. The Tough+ series features high-quality SUNPOWER cells, which increase the modules’ overall efficiency to 25.2%.
5-dimensional layer system
The improved surface finish of these modules is extremely durable and resistant to high levels of UV radiation. The material has a better light transmission than conventional materials. When partially shaded, the physical cell arrangement ensures a higher output power than other modules. The surface structure improves power generation at low light incidence angles and has anti-slip properties. In addition, the shock-absorbing layer has been improved; this protects the solar cells and the cabling and helps to extend the system’s lifespan.
Flushed Soft Junction Box
The semi-flexible flush modules, which are only 3 mm thin, feature no obstacles or tripping hazards on the module surface because there is no junction box. This is the only type of module that can be mounted almost flush with the surface (flush mount)
With rear-side module connection via an inconspicuous, 2-core flat black connector cable. The cable can be glued to dark surfaces / mounting surfaces next to the module, almost so that it is barely visible.
Details at a glance
- Semi-flexible
- High level of efficiency
- Durable and UV-resistant
- Small size and high performance
- Shadow Optimised: Improved yield characteristics in partial shade
- Yield enhancing, anti-slip surface structure
- Flush mounting (no annoying connection box on the module surface)
Because the connecting cables of the flush modules run directly out of the back of the module, there are no integrated blocking / bypass diodes on these modules. For modules with a connection box, these are usually integrated in the connection box.
Bypass / blocking diodes
Use bypass / blocking diodes if necessary (in accordance with the installation instructions). The F1200D Schottky diode (12A / 200V) is suitable for 5 - 350 Wp modules and is available from electronics retailers or from us on request.
To install, the module connection cables must be routed to a dry installation area and, together with the diode, mounted on suitable terminal blocks, e.g. item 47023. "In-line" installation is not advisable, as the diodes can become quite warm when the module is shaded.
Make sure that the diodes have the correct polarity! A ring or point on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect or reverse polarity connected diodes can damage the solar module.
Technical Data
| Type | Tough G8 Performance 82 W |
| Max. power (Pmax) | 82 W |
| Open circuit voltage (Uoc) | 24.52 V |
| Short circuit current (Isc) | 4.36 A |
| Nominal voltage (Ump) | 21.12 V |
| Nominal current (Imp) | 3.9 A |
| Weight | 1.5 kg |
| Dimensions (L x W x H) | 778 x 540 x 3 mm |
Installation instructions
- Tough Performance solar modules are supplied with a double-sided 3M adhesive pad. The adhesive pad is the easiest and most durable installation method for your Sunbeam solar panel. The 2 mm thick pad runs across the entire module size. Important: Please observe the manufacturer's instructions for correct mounting and electrical installation in the provided installation manual.
- Do not use modules with more than 50 W on a soft surface. SUNBEAM Tough Flush solar modules with greater than 50 watts of power are designed for permanent installation on a solid surface. Mounting can be done by gluing or screwing.
- For mobile or temporary use, modules up to 50 W and a fixed connection box are more suitable.
Documents
Short manual
PDF (1,05 MB)
Systems
Product safety
Customers ask customers
No questions asked yet. Be the first to ask a question!
Comparison
Availability / Price
Item no.
35161
35160
35162
Customer ratings
Description
SUNBEAMsystems - Solar module Tough G8 Performance 82 W
SUNBEAMsystems - Solar module TOUGH G8 Performance 39 W
SUNBEAMsystems - Solar module Tough G8 Performance 116 W
Width
540 mm
378 mm
540 mm
Height
3 mm
3 mm
3 mm
Nominal Power @ 12 V
82 W
39 W
116 W
Weight
1.5 kg
0.7 kg
2 kg
Attachment
Adhesive
Adhesive
Adhesive
Length
778 mm
535 mm
1.06 m
Installation type
Deck, Firm substrate
Deck, Firm substrate
Deck, Firm substrate
Connector
None
None
None
Walkable
Construction type
Semi-flexible
Semi-flexible
Semi-flexible
Module connection
Rear side
Rear side
Rear side
Connector cable
Flat cable (2-core)
Flat cable (2-core)
Flat cable (2-core)
Open circuit voltage (Uoc)
24.52 V
23.08 V
23.07 V
Short circuit current (Isc)
4.36 A
2.05 A
6.15 A
max. Power Voltage (Ump)
21.12 V
19.88 V
19.87 V
max. Power Current (Imp)
3.9 A
1.95 A
5.84 A
Daily yield in summer (Northern Europe)
246 - 328 Wh/Day
117 - 156 Wh/Day
348 - 464 Wh/Day
Daily yield in summer (Southern Europe)
328 - 410 Wh/Day
156 - 195 Wh/Day
464 - 580 Wh/Day
Use of light
Monofacial
Monofacial
Monofacial
Similar items
-42%
Solar Panel / 100 W / Semi-flexible / 1045 x 475 x 2.5 mm
€119.99
only
€69.95
> 100
-20%
Solar Panel / 130 W / Semi-flexible / 960 x 690 x 2.5 mm
€100.00
only
€79.95
> 100
-44%
Solar Module / 120 W / frame module / 960 x 670 x 35 mm
€124.99
only
€69.95
32
NEW
Solar Module / 195 W / frame module / 1335 x 670 x 35 mm
only
€129.95
77
SUNBEAM
NORDIC Solar Module / 104 W / semi-flexible / 1060 x 540 x 3 mm
only
€269.00
10
-16%
PHAESUN
MARE FLEX 55 Solar Module / 55 W / Semi-flexible / 560 x 540 x 4 mm
€167.55
only
€139.95
11
-23%
PHAESUN
MARE FLEX 120 Solar Module / 120 W / Semi-flexible / 1190 x 540 x 4 mm
€349.27
only
€269.95
13
-22%
PHAESUN
MARE FLEX 155 Solar Module 155 / 155 W / semi-flexible / 1440 x 540 x 4 mm
€450.30
only
€349.95
12
-16%
SUNBEAM
TOUGH 111 W Solar Panel / FLUSH / 111 W / Semi-flexible / 1060 x 540 x 3 mm
€499.00
only
€419.00
5
PHAESUN
Solar Module SPR-40 / 40 W / framed module / 510 x 415 x 35 mm
only
€124.95
2
Last seen products
NEW
SEATEC
Gate Stanchion V4A / for JEANNEAU SUN DANCE, SUN ODYSSEY / Length: 642 mm
only
€99.95
25
-9%
SPRENGER
S Block with Swivel, Becket and Clamp / 12 mm / needle bearing
€142.65
only
€129.95
3
SUNBEAM
Solar Module TOUGH G8 Performance 39 W / 39 W / semi-flexible / 378 x 535 x 3 mm
only
€239.00
7
Add beacon online
NEW
VELERIA SAN GIORGIO
SOLAS Modulo 275-HX Life Jacket / / 310 N / black / automatic/manual
only
€199.95
3
LOFRANS
Replacement Motor for X4/SX3.5/Albatros de Luxe/Titan / 24 V / 2300 W
only
€1,159.95
-10%
SPRENGER
S Block with Swivel, Becket and Clamp / 8 mm / needle bearing
€125.60
only
€112.95
3
JOHNSON PUMP
Seawater / Impeller pump for Volvo Penta D1-30 / D2-40 / D2-55 / MD 2010-2040
only
€469.95
1
-9%
PFEIFFER
Marine Traveller with 1 single block, cleat and becket / size 2 / 6 SS bearings
€459.99
only
€419.95
5
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!