VICTRON ARGO 100-3 Isolation Diode / Shottky / 100A / 3 battery banks
SVB item number: 41231
Manufacturer no.: ARG100301000R
With the ARGO isolation diodes from Victron, several batteries can be charged simultaneously without having to connect the individual batteries in parallel. This prevents the batteries from affecting each other or discharging together. Suitable for 12/24 V systems. Maximum charging current: 100 A. Number of batteries: 3. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
VICTRON
ARGO 120-2 Isolation Diode / Shottky / 120 A / 2 battery banks
€96.39
only €84.95
VICTRON
ARGO 140-3 Isolation Diode / Shottky / 140 A / 3 battery banks
€121.38
only €109.95
At a glance!
Product data
- SVB item number 41231
- EAN 8719076019046
- Manufacturer no. ARG100301000R
- Description VICTRON - ARGO 100-3 isolation diode / 100A / 3 battery banks
- Operating voltage 12 V, 24 V
- Max. charging current 100 A
- Charging outputs 3
- Connector pins M6
- Generator start-up control Yes
- Voltage loss Yes
- Width 115 mm
- Height 120 mm
- Depth 60 mm
- Weight 0.8 kg
Product details
With the ARGO isolation diodes from Victron, several batteries can be charged simultaneously without having to connect the individual batteries in parallel. This prevents the batteries from affecting each other or discharging together. Voltage loss is kept low thanks to the Shottky diodes. Suitable for 12/24 V systems.
On-board installations often comprise two or more battery groups, such as starter battery, supply battery and/or batteries for bow thrusters and navigation equipment. Here it is important that these individual battery groups do not interfere with each other and are insulated. This, of course, means that the charging system must also be isolated. However, this makes the charging process more complicated, as either the alternator, the generator or the charger has to recharge the batteries one by one. When choosing isolating diodes/relays, always keep in mind the maximum possible charging current. For example, if your alternator has 50-70 amps output, a 70 amp isolating diode will be enough.
With an isolating diode, it is possible to charge up to three batteries at the same time from one alternator / battery charger without having to connect the batteries together. This isolates the charging current and prevents mutual discharge. Commercially available isolating diodes cause a voltage drop of between 0.3 and 1.2 V, depending on their design. This may not sound like much, but the result is an incomplete charging process and batteries will not be charged 100%. Our isolating diodes feature Schottky diodes with a voltage drop of 0.7 V.
Isolating diodes with integrated balancing/compensating diode
renndioden mit integrierter Ausgleichs- /Kompensationsdiode
Here the voltage drop is reduced to almost 0.005 V. For these diodes, a cable must be routed from the D+ alternator to the diode distributor.
Connection example
Technical data
On-board installations often comprise two or more battery groups, such as starter battery, supply battery and/or batteries for bow thrusters and navigation equipment. Here it is important that these individual battery groups do not interfere with each other and are insulated. This, of course, means that the charging system must also be isolated. However, this makes the charging process more complicated, as either the alternator, the generator or the charger has to recharge the batteries one by one. When choosing isolating diodes/relays, always keep in mind the maximum possible charging current. For example, if your alternator has 50-70 amps output, a 70 amp isolating diode will be enough.
With an isolating diode, it is possible to charge up to three batteries at the same time from one alternator / battery charger without having to connect the batteries together. This isolates the charging current and prevents mutual discharge. Commercially available isolating diodes cause a voltage drop of between 0.3 and 1.2 V, depending on their design. This may not sound like much, but the result is an incomplete charging process and batteries will not be charged 100%. Our isolating diodes feature Schottky diodes with a voltage drop of 0.7 V.
Isolating diodes with integrated balancing/compensating diode
renndioden mit integrierter Ausgleichs- /Kompensationsdiode
Here the voltage drop is reduced to almost 0.005 V. For these diodes, a cable must be routed from the D+ alternator to the diode distributor.
Connection example
Technical data
| Maximum charging current | 100 A |
| Number of batteries | 3 |
| Alternator energize input | Yes |
| Cable connection | M6 bolts |
| Compensation diode connection | 6.3 mm Faston |
| Dimensions (HxWxL) | 60 x 120 x 115 mm |
| Weight: | 0.8 kg |
Product safety
Customers ask customers
No questions asked yet. Be the first to ask a question!
More "Customers ask customers" available in the following languages
Comparison
Availability / Price
Item no.
41231
41232
41233
41230
Customer ratings
Description
VICTRON - ARGO 100-3 isolation diode / 100A / 3 battery banks
VICTRON - ARGO 120-2 isolation diode / 120A / 2 battery banks
VICTRON - ARGO 140-3 isolation diode / 140A / 3 battery banks
VICTRON - ARGO 80-2 isolation diode / 80A / 2 battery banks
Width
115 mm
75 mm
75 mm
Height
120 mm
120 mm
120 mm
120 mm
Max. charging current
100 A
120 A
140 A
80 A
Type
80-2
Depth
60 mm
60 mm
60 mm
60 mm
Weight
0.8 kg
0.8 kg
1.1 kg
0.5 kg
Charging outputs
3
2
3
2
Operating voltage
12 V, 24 V
12 V, 24 V
12 V, 24 V
12 V, 24 V
Connector pins
M6
M8
M8
M6
Generator start-up control
Voltage loss
Customers also bought
-30%
JABSCO
Twist’n’Lock Marine Toilet (New Style) / compact
€286.11
only
€199.95
> 73
SIKA
Sikaflex - 291i Marine Sealant / Filler
from
€8.95
(€127.85 / L)
6 variants
Spare Bulb for Navigation Lights / 12 V / 10 W
only
€9.95
81
-14%
MAESTRINI
Intake Strainer, Brass CR
€28.89
from
€24.95
6 variants
RULE
LP900S Bilge Pump
only
€103.50
57
INTERNATIONAL
ULTRA 300 Hard Antifouling
from
€46.95
(€62.61 / L)
14 variants
Similar items
VICTRON
BCD402 Diode Battery Combiner for two batteries / 40A / 12/24V
only
€44.95
2
VICTRON
BCD802 Diode Battery Combiner for two batteries / 80A / 12/24V
only
€54.95
4
-7%
VICTRON
ARGO 80-2 Isolation Diode / Shottky / 80A / 2 battery banks
€63.07
only
€58.95
10
-12%
VICTRON
ARGO 120-2 Isolation Diode / Shottky / 120 A / 2 battery banks
€96.39
only
€84.95
8
-9%
VICTRON
ARGO 140-3 Isolation Diode / Shottky / 140 A / 3 battery banks
€121.38
only
€109.95
5
NAUTIC POWER - Lossless Diode Distributor / 90 A / 2 batteries
only
€109.95
11
NAUTIC POWER - Lossless Diode Distributor / 90 A / 3 batteries
only
€149.95
2
Last seen products
VEREINS-STANDER
AWSC retirement home
only
€24.95
4
BLUE SEA
Weatherproof Fuse Panels with ATO fuse / 6-section
only
€169.95
2
-27%
YACHTICON
AC Filter Cartridge / Activated Carbon / small / 5 microns
€29.95
only
€21.95
ROCA
Stainless Steel Deck Filler with Handle / waste water
only
€139.95
3
-39%
V4A Assortment Box / hose clamps / 8-32 mm / 30 pieces
€39.00
only
€23.95
56
-13%
GARMIN
Panoptix LIVESCOPE Plus System with LVS34 Transducer and GLS10 Sonar Box
€1,799.99
only
€1,569.95
-11%
RAYMARINE
RV-212 Bronze Through-Hull Transducer Set / 12° deadrise angle
€2,276.47
only
€2,029.95
1
-21%
GEBO
R30 Offshore Hatch / size 30 / 470 x 470 mm
€715.27
only
€565.95
2
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!