SUNBEAM Solar Module TOUGH G8 111 W / 111 W / semi-flexible / 1060 x 540 x 3 mm
SVB item number: 35156
Manufacturer no.: T8-106X54
SUNBEAMsystems Tough G8 solar modules are a reliable source of energy even under the most difficult conditions thanks to the highly efficient SUNPOWER Maxeon cells (22.6% efficiency). The semi-flexible modules are only 3 mm thick and can be installed almost flush with the surface thanks to the absence of a junction box. The shadow-optimised panels impress in the 8th generation with an improved 5-layer structure. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
SUNBEAM
Solar Module TOUGH G8 21 W / 21 W / semi-flexible / 434 x 277 x 3 mm
only €139.00
To product
SUNBEAM
Solar Module TOUGH G8 37 W / 37 W / semi-flexible / 535 x 378 x 3 mm
only €169.00
To product
SUNBEAM
Solar Module TOUGH G8 78 W / 78 W / semi-flexible / 778 x 540 x 3 mm
only €349.00
To product
SUNBEAM
Solar Module TOUGH G8 55 W / 55 W / Semi-flexible / 545 x 535 x 3 mm
only €239.00
To product
Product data
- SVB item number 35156
- EAN 7331898847952
- Manufacturer no. T8-106X54
- Description SUNBEAMsystems - Solar module Tough G8 111 W
- Construction type Semi-flexible
- Nominal Power @ 12 V 111 W
- max. Power Current (Imp) 5.97 A
- max. Power Voltage (Ump) 18.56 V
- Short circuit current (Isc) 6.32 A
- Open circuit voltage (Uoc) 21.76 V
- Connector None
- Attachment Adhesive
- Module connection Rear side
- Connector cable Flat cable (2-core)
- Walkable Yes
- Length 1.06 m
- Width 540 mm
- Height 3 mm
- Installation type Deck, Firm substrate
- Weight 2 kg
- Daily yield in summer (Northern Europe) 333 - 444 Wh/Day
- Daily yield in summer (Southern Europe) 444 - 555 Wh/Day
- Use of light Monofacial
Product details
SUNBEAMsystems Tough G8 solar modules are a reliable source of energy even under the most difficult conditions thanks to the highly efficient SUNPOWER Maxeon cells (22.6% efficiency). The shade-optimised panels impress in the 8th generation with an improved 5-layer structure. Due to their impressive technical properties, the Tough-G8 modules are frequently used in the yacht and caravan sector, as well as in private and industrial off-grid systems.
The modules are supplied with a full-size 3M adhesive tape, but the modules have no eyelets for fastening.
5-dimensional layer system
The improved module surface of these modules is extremely durable and resistant to high UV radiation. The material used has better light transmission than conventional materials, and compared to other modules, the physical cell arrangement of these modules ensures a higher output power with partial shading. The surface structure promotes power generation at low light incidence angles and also ensures non-slip properties. In addition, the shock-absorbing layer has been improved, which protects the solar cells and cabling and increases the service life.
Flushed soft junction box
The semi-flexible flush modules are only 3 mm thin and have no obstacles or tripping hazards on the module surface due to the absence of a junction box. Only this type of module allows almost flush mounting!
The electrical connection is made from the rear of the module via an inconspicuous, flat, white double-strand cable (2x 1.6 mm²/approx. 1500 x 5.5 x 2.5 mm) and the cable can be glued almost invisibly next to the module on white surfaces/mounting surfaces.
Details at a glance
Special technical feature of flush modules
As the connection cables of the flush modules are routed directly out of the back of the module, there are no integrated blocking/bypass diodes on these modules. (On modules with a connection box, these are usually integrated in the connection box).
Bypass/blocking diodes
If required, use bypass/blocking diodes (in accordance with the installation instructions). The Schottky diode F1200D (12A/200V) is suitable for 5 - 350 Wp modules and is available from specialist electronics retailers or from us on request.
For installation, the module connection cables must be routed into a dry mounting environment and mounted there together with the diode on suitable terminal blocks, e.g. Art. 47023. With powerful modules, "flying" mounting is not advisable, as the diodes can become quite warm when a module is shaded.
Pay attention to the correct polarity of the diodes! A ring or dot on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect diodes or diodes connected with reversed polarity can damage the solar module.
Technical data
Installation instructions
The modules are supplied with a full-size 3M adhesive tape, but the modules have no eyelets for fastening.
5-dimensional layer system
The improved module surface of these modules is extremely durable and resistant to high UV radiation. The material used has better light transmission than conventional materials, and compared to other modules, the physical cell arrangement of these modules ensures a higher output power with partial shading. The surface structure promotes power generation at low light incidence angles and also ensures non-slip properties. In addition, the shock-absorbing layer has been improved, which protects the solar cells and cabling and increases the service life.
Flushed soft junction box
The semi-flexible flush modules are only 3 mm thin and have no obstacles or tripping hazards on the module surface due to the absence of a junction box. Only this type of module allows almost flush mounting!
The electrical connection is made from the rear of the module via an inconspicuous, flat, white double-strand cable (2x 1.6 mm²/approx. 1500 x 5.5 x 2.5 mm) and the cable can be glued almost invisibly next to the module on white surfaces/mounting surfaces.
Details at a glance
- Semi-flexible
- High efficiency
- Durable and UV-resistant
- Small size & high performance
- Shadow Optimised: Improved yield characteristics with partial shading
- Yield-enhancing and anti-slip surface structure
- Almost flush mounting (no disruptive connection box on the module surface)
Special technical feature of flush modules
As the connection cables of the flush modules are routed directly out of the back of the module, there are no integrated blocking/bypass diodes on these modules. (On modules with a connection box, these are usually integrated in the connection box).
Bypass/blocking diodes
If required, use bypass/blocking diodes (in accordance with the installation instructions). The Schottky diode F1200D (12A/200V) is suitable for 5 - 350 Wp modules and is available from specialist electronics retailers or from us on request.
For installation, the module connection cables must be routed into a dry mounting environment and mounted there together with the diode on suitable terminal blocks, e.g. Art. 47023. With powerful modules, "flying" mounting is not advisable, as the diodes can become quite warm when a module is shaded.
Pay attention to the correct polarity of the diodes! A ring or dot on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect diodes or diodes connected with reversed polarity can damage the solar module.
Technical data
| Module type | Tough G8 111 W |
| Max. power (Pmax) | 111 W |
| Open circuit voltage (Uoc) | 21,76 V |
| Short-circuit current (Isc) | 6,32 A |
| Nominal voltage (Ump) | 18,56 V |
| Rated current (Imp) | 5,97 A |
| weight | 2.0 kg |
| Dimensions (L x W x H) | 1060 x 540 x 3 mm |
| Cable length | 1,5 m |
Installation instructions
- In the enclosed SUNBEAMsystem installation manual you will find all the relevant information on correct module selection, mounting and electrical installation. You will also find a quick guide with lots of relevant information in the download area.
- A double-sided 3M adhesive tape is included in the scope of delivery for convenient installation. The Tough G8 modules do not have eyelets
- ATTENTION: Only SIKASIL WS605S, SIKAFLEX 298FC or ZETTEX MS POLYMER 25 is approved for bonding the modules in other ways
- Please check the solar modules after receiving the goods or before installing the panels.
- Do not use modules > 50 W on a soft surface.
The SUNBEAM Tough Flush (TF) solar modules with an output of more than 50 watts are designed for permanent installation on a hard surface. They can be mounted using adhesive or screws.
Documents
Short manual
PDF (1,05 MB)
Systems
Product safety
Customers ask customers
No questions asked yet. Be the first to ask a question!
Comparison
Availability / Price
Item no.
35156
35152
35153
35155
35154
Customer ratings
Description
SUNBEAMsystems - Solar module Tough G8 111 W
SUNBEAMsystems - Solar module Tough G8 21W
SUNBEAMsystems - Solar module Tough G8 37 W
SUNBEAMsystems - Solar module Tough G8 78 W
SUNBEAMsystems - Solar module Tough G8 55 W
Width
540 mm
277 mm
378 mm
540 mm
535 mm
Height
3 mm
3 mm
3 mm
3 mm
3 mm
Nominal Power @ 12 V
111 W
21 W
37 W
78 W
55 W
Weight
2 kg
0.3 kg
0.7 kg
1.5 kg
Attachment
Adhesive
Adhesive
Adhesive
Adhesive
Adhesive
Length
1.06 m
434 mm
535 mm
778 mm
545 mm
Installation type
Deck, Firm substrate
Deck, Firm substrate
Deck, Firm substrate
Deck, Firm substrate
Deck, Firm substrate
Connector
None
None
None
None
None
Walkable
Construction type
Semi-flexible
Semi-flexible
Semi-flexible
Semi-flexible
Semi-flexible
Module connection
Rear side
Rear side
Rear side
Rear side
Rear side
Connector cable
Flat cable (2-core)
Flat cable (2-core)
Flat cable (2-core)
Flat cable (2-core)
Flat cable (2-core)
Open circuit voltage (Uoc)
21.76 V
24.48 V
21.77 V
23.12 V
21.76 V
Short circuit current (Isc)
6.32 A
1.19 A
2.11 A
4.48 A
3.16 A
max. Power Voltage (Ump)
18.56 V
20.88 V
18.57 V
19.72 V
19.5 V
max. Power Current (Imp)
5.97 A
0.99 A
1.99 A
3.98 A
2.82 A
Daily yield in summer (Northern Europe)
333 - 444 Wh/Day
63 - 84 Wh/Day
111 - 148 Wh/Day
234 - 312 Wh/Day
165 - 220 Wh/Day
Daily yield in summer (Southern Europe)
444 - 555 Wh/Day
84 - 105 Wh/Day
148 - 185 Wh/Day
312 - 390 Wh/Day
220 - 275 Wh/Day
Use of light
Monofacial
Monofacial
Monofacial
Monofacial
Monofacial
Similar items
-42%
Solar Panel / 100 W / Semi-flexible / 1045 x 475 x 2.5 mm
€119.99
only
€69.95
> 100
-20%
Solar Panel / 130 W / Semi-flexible / 960 x 690 x 2.5 mm
€100.00
only
€79.95
> 100
-44%
Solar Module / 120 W / frame module / 960 x 670 x 35 mm
€124.99
only
€69.95
32
NEW
Solar Module / 195 W / frame module / 1335 x 670 x 35 mm
only
€129.95
77
SUNBEAM
NORDIC Solar Module / 104 W / semi-flexible / 1060 x 540 x 3 mm
only
€269.00
10
-16%
PHAESUN
MARE FLEX 55 Solar Module / 55 W / Semi-flexible / 560 x 540 x 4 mm
€167.55
only
€139.95
11
-23%
PHAESUN
MARE FLEX 120 Solar Module / 120 W / Semi-flexible / 1190 x 540 x 4 mm
€349.27
only
€269.95
13
-22%
PHAESUN
MARE FLEX 155 Solar Module 155 / 155 W / semi-flexible / 1440 x 540 x 4 mm
€450.30
only
€349.95
12
-16%
SUNBEAM
TOUGH 111 W Solar Panel / FLUSH / 111 W / Semi-flexible / 1060 x 540 x 3 mm
€499.00
only
€419.00
5
PHAESUN
Solar Module SPR-40 / 40 W / framed module / 510 x 415 x 35 mm
only
€124.95
2
Last seen products
LOFRANS
Replacement Motor for Dorado/X0/X1/Marlin/Scorpion/Panther / 12 V / 500 W
only
€259.95
2
NEW
SEATEC
Stanchion V4A / for BENETEAU FIRST, OCEANIS, OCEANIS CLIPPER / 642 mm / cylindrical head
only
€42.95
34
-34%
VELERIA SAN GIORGIO
HURRICANE EVO 290 Life Jacket / 290 N / black
€285.95
only
€189.95
> 100
NEW
KARTENWERFT
Nautical Charts Atlas DK2 / Copenhagen and Zealand
only
€79.90
4
NEW
SEATEC
Gate Stanchion V4A / for JEANNEAU SUN DANCE, SUN ODYSSEY / Length: 642 mm
only
€99.95
25
-9%
SPRENGER
S Block with Swivel, Becket and Clamp / 12 mm / needle bearing
€142.65
only
€129.95
3
SUNBEAM
Solar Module TOUGH G8 21 W / 21 W / semi-flexible / 434 x 277 x 3 mm
only
€139.00
3
-10%
SPRENGER
S Block with Swivel, Becket and Clamp / 10 mm / needle bearing
€133.10
only
€119.95
1
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!