SUNBEAM Solar Module TOUGH G8 Performance 39 W / 39 W / semi-flexible / 378 x 535 x 3 mm
SVB item number: 35160
Manufacturer no.: TP8-38X53
SUNBEAMsystems Tough G8 Performance solar modules offer more power than comparable models from the Tough series and, thanks to the highly efficient SUNPOWER cells (25.2 % efficiency), are a reliable source of energy even under the most difficult conditions. The semi-flexible modules, which are only 3 mm thick, can be mounted almost flush with the surface due to the absence of junction boxes. The shadow-optimised panels impress in the 8th generation with an improved 5-layer structure. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
SUNBEAM
Solar Module TOUGH G8 Performance 82 W / 82 W / semi-flexible / 778 x 540 x 3 mm
only €479.00
To product
SUNBEAM
Solar Module TOUGH G8 Performance 116 W / 116 W / semi-flexible / 1060 x 540 x 3 mm
only €679.00
To product
Product data
- SVB item number 35160
- EAN 7331898066728
- Manufacturer no. TP8-38X53
- Description SUNBEAMsystems - Solar module TOUGH G8 Performance 39 W
- Construction type Semi-flexible
- Nominal Power @ 12 V 39 W
- max. Power Current (Imp) 1.95 A
- max. Power Voltage (Ump) 19.88 V
- Short circuit current (Isc) 2.05 A
- Open circuit voltage (Uoc) 23.08 V
- Connector None
- Attachment Adhesive
- Module connection Rear side
- Connector cable Flat cable (2-core)
- Walkable Yes
- Length 535 mm
- Width 378 mm
- Height 3 mm
- Installation type Deck, Firm substrate
- Weight 0.7 kg
- Daily yield in summer (Northern Europe) 117 - 156 Wh/Day
- Daily yield in summer (Southern Europe) 156 - 195 Wh/Day
- Use of light Monofacial
Product details
SUNBEAMsystems Tough G8 Performance solar modules offer more power than comparable models from the Tough series and, thanks to the highly efficient SUNPOWER cells (25.2 % efficiency), are a reliable source of energy even under the most difficult conditions. Due to their impressive technical properties, the Tough-Performance modules are frequently used in the yacht and caravan sector, as well as in private and industrial systems.
The modules are supplied with a full-size 3M adhesive tape, but the modules have no eyelets for fastening.
Higher efficiency and performance
The SUNBEAM Tough G8 Performance series offers more power than comparable models from the SUNBEAM Tough series. The Tough+ series has high-quality SUNPOWER cells, which increase the efficiency of the modules to a total of 25.2%.
5-dimensional layer system
The improved module surface of these modules is extremely durable and resistant to high UV radiation. The material used has better light transmission than conventional materials, and compared to other modules, the physical cell arrangement of these modules ensures a higher output power with partial shading. The surface structure promotes power generation at low light incidence angles and also ensures non-slip properties. In addition, the shock-absorbing layer has been improved, which protects the solar cells and cabling and increases the service life.
Flushed soft junction box
The semi-flexible flush modules, which are only 3 mm thin, have no obstacles or tripping hazards on the module surface due to the absence of junction boxes. Only this type of module allows almost flush mounting.
The electrical connection is made from the rear of the module via an inconspicuous, flat, black double-core cable. The cable can be glued next to the module on dark surfaces / mounting surfaces so that it is almost invisible.
Details at a glance
As the connection cables of the flush modules are routed directly out of the back of the module, there are no integrated blocking/bypass diodes on these modules. On modules with a connection box, these are usually integrated in the connection box.
Bypass / blocking diodes
If required, use bypass/blocking diodes (in accordance with the installation instructions). The Schottky diode F1200D (12A/200V) is suitable for 5 - 350 Wp modules and is available from specialist electronics retailers or from us on request.
For installation, the module connection cables must be routed into a dry installation environment and mounted there together with the diode on suitable terminal blocks, e.g. Art. 47023. With powerful modules, "flying" mounting is not advisable, as the diodes can become quite warm when a module is shaded.
Pay attention to the correct polarity of the diodes! A ring or dot on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect diodes or diodes connected with reversed polarity can damage the solar module.
Technical data
Mounting instructions
The modules are supplied with a full-size 3M adhesive tape, but the modules have no eyelets for fastening.
Higher efficiency and performance
The SUNBEAM Tough G8 Performance series offers more power than comparable models from the SUNBEAM Tough series. The Tough+ series has high-quality SUNPOWER cells, which increase the efficiency of the modules to a total of 25.2%.
5-dimensional layer system
The improved module surface of these modules is extremely durable and resistant to high UV radiation. The material used has better light transmission than conventional materials, and compared to other modules, the physical cell arrangement of these modules ensures a higher output power with partial shading. The surface structure promotes power generation at low light incidence angles and also ensures non-slip properties. In addition, the shock-absorbing layer has been improved, which protects the solar cells and cabling and increases the service life.
Flushed soft junction box
The semi-flexible flush modules, which are only 3 mm thin, have no obstacles or tripping hazards on the module surface due to the absence of junction boxes. Only this type of module allows almost flush mounting.
The electrical connection is made from the rear of the module via an inconspicuous, flat, black double-core cable. The cable can be glued next to the module on dark surfaces / mounting surfaces so that it is almost invisible.
Details at a glance
- Semi-flexible
- High efficiency
- Durable and UV-resistant
- Small size and high performance
- Shadow Optimised: Improved yield characteristics with partial shading
- Yield-enhancing and anti-slip surface structure
- Almost flush mounting (no disruptive connection box on the module surface)
As the connection cables of the flush modules are routed directly out of the back of the module, there are no integrated blocking/bypass diodes on these modules. On modules with a connection box, these are usually integrated in the connection box.
Bypass / blocking diodes
If required, use bypass/blocking diodes (in accordance with the installation instructions). The Schottky diode F1200D (12A/200V) is suitable for 5 - 350 Wp modules and is available from specialist electronics retailers or from us on request.
For installation, the module connection cables must be routed into a dry installation environment and mounted there together with the diode on suitable terminal blocks, e.g. Art. 47023. With powerful modules, "flying" mounting is not advisable, as the diodes can become quite warm when a module is shaded.
Pay attention to the correct polarity of the diodes! A ring or dot on the diode housing marks the cathode. This must be connected to the PLUS connection of the module.
Important: Incorrect diodes or diodes connected with reversed polarity can damage the solar module.
Technical data
| Module type | Tough G8 Performance 39 W |
| Max. power (Pmax) | 39 W |
| Open circuit voltage (Uoc) | 23,08 V |
| Short-circuit current (Isc) | 2,05 A |
| Nominal voltage (Ump) | 19,88 V |
| Rated current (Imp) | 1,95 A |
| weight | 0.7 kg |
| Dimensions (L x W x H) | 535 x 378 x 3 mm |
Mounting instructions
- The Tough Performance solar modules are supplied with a double-sided 3M adhesive pad. The adhesive pad is the easiest and most durable installation method for your Sunbeam solar panel. The 2 mm thick pad covers the entire module size. Important: Please follow the manufacturer's instructions for correct mounting and electrical installation in the enclosed installation manual.
- Do not use modules larger than 50 W on a soft surface. The SUNBEAM Tough Flush solar modules with an output of more than 50 watts are designed for permanent mounting on a hard surface. They can be mounted using adhesive or screws.
- For mobile or temporary use, modules up to 50 W and a fixed connection box are the better choice.
Documents
Short manual
PDF (1,05 MB)
Systems
Product safety
Customers ask customers
No questions asked yet. Be the first to ask a question!
Comparison
Availability / Price
Item no.
35160
35161
35162
Customer ratings
Description
SUNBEAMsystems - Solar module TOUGH G8 Performance 39 W
SUNBEAMsystems - Solar module Tough G8 Performance 82 W
SUNBEAMsystems - Solar module Tough G8 Performance 116 W
Width
378 mm
540 mm
540 mm
Height
3 mm
3 mm
3 mm
Nominal Power @ 12 V
39 W
82 W
116 W
Weight
0.7 kg
1.5 kg
2 kg
Attachment
Adhesive
Adhesive
Adhesive
Length
535 mm
778 mm
1.06 m
Installation type
Deck, Firm substrate
Deck, Firm substrate
Deck, Firm substrate
Connector
None
None
None
Walkable
Construction type
Semi-flexible
Semi-flexible
Semi-flexible
Module connection
Rear side
Rear side
Rear side
Connector cable
Flat cable (2-core)
Flat cable (2-core)
Flat cable (2-core)
Open circuit voltage (Uoc)
23.08 V
24.52 V
23.07 V
Short circuit current (Isc)
2.05 A
4.36 A
6.15 A
max. Power Voltage (Ump)
19.88 V
21.12 V
19.87 V
max. Power Current (Imp)
1.95 A
3.9 A
5.84 A
Daily yield in summer (Northern Europe)
117 - 156 Wh/Day
246 - 328 Wh/Day
348 - 464 Wh/Day
Daily yield in summer (Southern Europe)
156 - 195 Wh/Day
328 - 410 Wh/Day
464 - 580 Wh/Day
Use of light
Monofacial
Monofacial
Monofacial
Similar items
-42%
Solar Panel / 100 W / Semi-flexible / 1045 x 475 x 2.5 mm
€119.99
only
€69.95
> 100
-20%
Solar Panel / 130 W / Semi-flexible / 960 x 690 x 2.5 mm
€100.00
only
€79.95
> 100
-44%
Solar Module / 120 W / frame module / 960 x 670 x 35 mm
€124.99
only
€69.95
32
NEW
Solar Module / 195 W / frame module / 1335 x 670 x 35 mm
only
€129.95
77
SUNBEAM
NORDIC Solar Module / 104 W / semi-flexible / 1060 x 540 x 3 mm
only
€269.00
10
-16%
PHAESUN
MARE FLEX 55 Solar Module / 55 W / Semi-flexible / 560 x 540 x 4 mm
€167.55
only
€139.95
11
-23%
PHAESUN
MARE FLEX 120 Solar Module / 120 W / Semi-flexible / 1190 x 540 x 4 mm
€349.27
only
€269.95
13
-22%
PHAESUN
MARE FLEX 155 Solar Module 155 / 155 W / semi-flexible / 1440 x 540 x 4 mm
€450.30
only
€349.95
12
-16%
SUNBEAM
TOUGH 111 W Solar Panel / FLUSH / 111 W / Semi-flexible / 1060 x 540 x 3 mm
€499.00
only
€419.00
5
PHAESUN
Solar Module SPR-40 / 40 W / framed module / 510 x 415 x 35 mm
only
€124.95
2
Last seen products
Impeller for Volvo Penta D4 Series, KA(M)D 32/42/44, KA(M)D 300, T(A)MD 30/31/40/41 & Nanni Diesel
only
€27.95
> 100
-20%
SEATEC
Tarpaulin Cover for YACHTING 250 and PRO TENDER 240 Inflatable Boats
€99.95
only
€79.95
29
-20%
SEATEC
Tarpaulin Cover for YACHTING 225 and PRO TENDER 220 Inflatable Boats
€94.95
only
€75.95
20
-20%
SEATEC
Tarpaulin Cover for AEROSTAR 265/AEROTEND 260/DOLPHIN 270 / 295x220cm
€99.95
only
€79.95
10
-10%
YACHTCARE
Gelcoat Crack Repair / steel blue RAL 5011
€12.10
only
€10.95
(€1,216.67 / L)
SUNBEAM
Solar Module TOUGH G8 Performance 116 W / 116 W / semi-flexible / 1060 x 540 x 3 mm
only
€679.00
9
AQUA SIGNAL
BREMEN Portable Search Light / 24 V / 50 W
only
€219.95
7
SUNBEAM
Solar Module TOUGH G8 78 W / 78 W / semi-flexible / 778 x 540 x 3 mm
only
€349.00
8
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!