The Lynx Class-T Power from VICTRON is part of the modular Lynx distribution system. It connects and secures up to two strings of lithium batteries. The Class-T Power In is equipped with a positive and a negative bus bar, as well as two connections for Class-T fuses and a ground connection for grounding the DC system. Please note that only T-fuses with a fuse size of 225 - 400 A can be used. You can use several Lynx Class-T Power In modules for additional strings of lithium batteries and connect them together.
Technical Data
| Voltage range |
9 - 60 VDC |
| Supported operating voltages |
12, 24 or 48 V |
| Busbar connection |
M10 |
| Fuse connection |
M10 |
| Case material |
ABS |
| Case dimensions (LxWxD) |
279 x 169 x 97 mm |
| Weight |
2.1 kg |
| Material busbar |
Tinned copper |
| Busbar dimensions (WxH) |
30 x 8 mm |
| Operating temperature |
-40 to +60°C |
| Storage temperature |
-40 to +60°C |
| Humidity |
Max. 95 % (non-condensing) |
| Protection category |
IP20 |
Note
1. Please note that the M10 connection refers to the busbar connections to which you can connect additional Lynx modules. It is not possible to connect M8 and M10 devices together.
2. Devices with a serial number beginning with HQXXXX also have M10 bolts for the fuse and wiring.
3. Only T-fuses with a fuse size of 225 - 400 A can be used. These have a length of 70 mm and a bolt Ø of 10 mm. These are sold separately.