The SW-20144 solar panel is designed for small solar systems. The 22 Wp panel is mainly designed for 12V systems, but may also be used in a series conjunction with 24V systems as well. Depending on the level of irradiation, the panel provides a charging current of up to 1.11 A.
The panel is often mounted on sliding hatches to maintain the charge of the batteries. Ideally suited for a moorings without power connection.
- 1.11 A max. charging current
- 4-6 Ah daily yield
- 10 white screw rosettes
Average daily yield (May-Sep):
- North / Baltic Sea area is approx. 4 x 1.11 => 4.4 Ah/day
- Mediterranean, Caribbean or California => 5.5 Ah/day
The base material is constructed as an aluminium sandwich core. The cells are ducted to the new core material perfectly, giving support and protection. The solar panel adapts to curved surfaces, with a maximum curvature of 3 cm / meter of panel length.
The panels are specially designed for rough sea and salt water. The cable outlet is screwed to the mounting plate, completely sealed and 100% saltwater proof. With hermetic encapsulation, cells and the base plate are well protected - even against saltwater.
In the solar industry, the solar cell has prevailed with an edge length of 156mm x 156mm in recent years. Up until recently, a basic cell was 100mm x 100mm in size. In order to be able to manufacture the most powerful cells in the future, all module formats have been adjusted to correspond with current cell formats, while reducing their dimensions.
Please note that the power output of solar panels comes directly from the intensity of incident light - not heat. This means that the power output will fluctuate depending on the time of year and location. For optimal performance, the panel should be oriented as perpendicular as possible to the sun and any shade should be avoided.
Technical data
| Name |
Value |
Unit |
| Pmax |
22.0 |
Wp |
| Imax |
1.03 |
A |
| Uoc |
25.4 |
V |
| Isc |
1.11 |
A |
| Number of cells |
40 |
pcs |
| Cell format |
52.0 x 52.0 |
mm |
| Laminate |
ETFE/EVA/ETFE |
|
| Length |
634.0 |
mm |
| Width |
273.0 |
mm |
| Drill holes |
6 x 9.0 |
mm |
| Sys. voltage |
12.0 |
V |
| Base |
3.0 mm Aluminium sandwich |
|
| Cable outlet |
On the frontside |
|
| Cable |
3 x 1.5 |
mm² |
| Cable length |
3.0 |
m |
| Colour |
White |
|
| Net weight |
1.2 |
KG |
| Gross weight |
2.5 |
KG |
Made in Germany!
All SunWare products are developed, tested and produced in Germany. The front cover of the panels are also made in Germany. By doing this, the high quality requirements of our products and materials can also be guaranteed.
Construction type
Semi-flexible
Module connection
Front side
Connector cable
Round (multi-core)
Installation type
Deck
Firm substrate