Used on a Sealine International Ltd. Sealine T 47 Motor Yacht
Used on a Pedro Skiron 35
Used on a Nimbus Boats AB Nimbus 3003
Used on a Chantiers Amel Amel Maramu
Used on a Bavaria 390 Lagoon
Used on a Bavaria 370 Lagoon
Used on a Bavaria 36
Used on a Optima 92
Used on a Optima 106
Used on a Dufour 32 Classic
Used on a Elan Impression 434
Used on a Sun Odyssey 40 DS
Used on a Nimbus 320 Coupé
Used on a Monsun 31
Used on a Windy 38
Used on a Galia 777 Cruiser
Used on a Vindö 452
Used on a Compromis 999
Used on a Saver 750 Cabin
Used on a Hanseat 35 MS
Used on a Skilsö 975 Arctic
Used on a Willing 31
Used on a First 405
Is in 3 shopping baskets right now, grab yours now!
The powerful 4D diesel air heater from Autoterm Air is ideal for larger boats from approx. 7.5 metres. Power levels and temperature control can be easily adjusted with the heater. Maximum heat output: 4.0 kW. Voltage: 12 V. Supplied with control element and bracket. Product details
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings.
Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP
address. Please also check your browser for updates.
The powerful 4D diesel air heater from Autoterm Air is ideal for larger boats from approx. 7.5 metres. The digital control panel (incl. temperature sensor) makes it very easy to adjust the power levels and control the temperature. The air heater is certified (e2) and can be installed without registration. The hole dimensions are identical to those of the popular Webasto or Erberspächer heaters, so it is easy to replace without having to drill new holes. Delivery includes an altitude kit, an exhaust silencer and all the components needed for installation. A minimum diameter of 90 mm is recommended for connecting hot air pipes. The connection adapter for the warm air side to reduce from 96 mm to the standard dimension of 90 mm, as well as a fuel tank, are not included in the delivery.
The heater's cable harness features a gate input for connecting your own remote control or other secondary control unit. You can choose whether the connection is made via ON/OFF switch or pulse. The advantage of the latter means that it is possible to operate the heater with different controllers. For example, you can switch on with a remote control or a push-button and later adjust power levels or even switch off from your bed using the included control element.
In addition, the air heater is equipped with a so-called altitude kit. Thanks to this altitude kit, the heater automatically reduces the quantity of fuel injected depending on the ambient air pressure. This prevents or drastically reduces the likelihood of the combustion chamber from clogging with carbon particulate in the event of a falling air oxygen content.
Maintenance is not normally necessary. However, to prolong service life the combustion chamber must be allowed to get really hot from time to time to burn off any residues. As a rule, running the heater at full power for at least half an hour once every week or every two weeks is enough to allow the combustion chamber to reach full temperature again.
Supplied with new control unit
The new Comfort Control boasts a modern design and numerous functions, such as three adjustable timers, extended heating modes, fan functions and much more. The intelligent thermostat function, for example, automatically switches the heating on when the temperature falls below a set number and similarly turns it off once a set temperature is reached. Multifunctional rotary knob with grippy rubber coating and OLED display. Small installation dimensions, easy to use, stylish design. Temperature sensor included. The cable length of the control panel is 1.8 metres.
Technical Data
Voltage
12 V
current consumption (watts)
10 - 57 W
Heating capacity
1 - 4 kW
Airflow rate
70 - 168 m³/h
Fuel consumption
0.12 - 0.51 l/h
Air intake
80 / 83 mm
Hot air outlet
96 / 100 mm
Dimensions
402 x 157 x 186 mm
Weight of the heater (without accessories)
5.5 kg
Included in delivery
12 V heater
Comfort Control control unit / Cable length: 1.8 m
Autoterm fuel pump
Exhaust silencer (170 x 90 x 50 mm)
Dosing pump rubber holder
Dosing pump wire harness
1.8 m heater wire harness
Intake air hose with integrated silencer
Heat protection hose
End piece exhaust pipe + clamp
Tank intake pipe
5.5 m fuel line
Fuel line connector
1 m corrugated metal exhaust pipe
Screws, nuts, brackets, heat shrink tubing, cable ties
Instruction manual
Bracket
Note
In order to avoid drilling large holes for the connectors when installing the dosing pump wire harness, a connector housing has not been partially installed on one side. It is included with the delivery and can be found in a small bag.
Polarity need not be observed when installing the contacts in the plug housing.
Features
Discover the features that make this product stand out. From technical details to special
functions – we’ve summarized all the key information for you.
I retrofitted this heater in an old motorhome a few years ago and it convinced me so much in terms of installation, application, quality and price that I am now installing it again in my new motorhome. I can only recommend this product.
Helpful?
by
Marc S.
12/11/2020
Verified purchase
Variant:
42915
Installed as a replacement for a gas heater and as a dubbing for a webasto. Super complete material, well packaged, good doc. And half cheaper than the 2 "other brands" and approved, unlike Chinese productions ....
We bought to replace the Webasto EVO3900, everything is very easy, same mount, same exhaust, our hot air pipe is already 100mm (the webasto outlet is smaller). The command and programming is more advanced and the configuration is easy. It's a bit noisier, we'll install a muffler. Highly recommended.
I installed the heater to replace my Webasto Airtop3500 which was showing its age. I can't tell any qualitative differences to the three times as expensive systems from the competitors. A few pointers for those interested The mounting base (angle plate) from Webasto did not fit. It is advisable to order a matching base. The connections for exhaust gas, air intake and diesel line, on the other hand, are compatible. The wiring harness is included, must be rerouted, not compatible. The diesel pump is only half as loud as the Webasto one, same installation position. The circulation noises at the vents in the cabin, on the other hand, were somewhat louder. I have therefore installed the appropriate silencer for the flow of warm air directly behind the heater and am now amazed by the silence! You only hear a whisper. The control panel is absolutely great and completely intuitive. The three modes, booster, thermostat and timer are also nice. An external thermostat can also be connected, but in my opinion it is not necessary. All in all a great facility, 5 stars!
Helpful?
Customers ask customers
No questions asked yet. Be the first to ask a question!
More "Customers ask customers" available in the following languages