YACHT DEVICES SeaTalkNG to NMEA0183 Converter
SVB item number: 90292
Manufacturer no.: YDNG-03R
This bidirectional converter allows you to easily connect your NMEA0183 devices to your SeaTalkNG network and vice versa. Support for many data outputs, such as: AIS, waypoints, routes and autopilot. Product details
Recommended retail price:
€213.66
only
€192.95
-10%
You save: €20.71
17
| in stock
Having issues?
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
If you are not redirected to PayPal, it could be due to your browser settings. Please check and if necessary deactivate the setting "Hide IP address" in the settings -> Safari -> Hide IP address. Please also check your browser for updates.
Are you already using this item?
Add to my boat now.
Available variants
At a glance!
Product data
Product details
This bidirectional converter allows you to easily connect your NMEA0183 devices to your SeaTalkNG network and vice versa. Support for many data outputs, such as: AIS, waypoints, routes and autopilot.
Baud rate is configurable from 300 to 115,200 baud for NMEA0183 connection and also allows you to easily use AIS transponders (38,400 baud) and PC adapters, in addition to the standard NMEA0183 devices. The default baud rate is 4,800 Baud. It is not possible to define a separate baud rate for the input or output, the defined baud rate is set for the input & output in parallel.
The device can be configured and firmware updates downloaded using a microSD card slot. No special software is needed for this! Only a device (laptop, PC, smartphone), a microSD card (not included) and a text editor are required.
During configuration, you can, for example, change the baud rate for AIS data to 38,400, 9,600 baud for Navtex data or for faster data transmission to up to 115,200 baud. Filters can also be set to block data sets that should not be rendered. There is a blacklist (block before rendering) and a whitelist function (only render these data sets).
Instructions for changing the baud rate:
Note: a second colour scheme has been used by the manufacturer since 2024. Unfortunately, the current scheme is still indicated on the housing label of the device. The old colour scheme #1 is used in the manual.
The conversion is as follows:
Technical specifications:
Baud rate is configurable from 300 to 115,200 baud for NMEA0183 connection and also allows you to easily use AIS transponders (38,400 baud) and PC adapters, in addition to the standard NMEA0183 devices. The default baud rate is 4,800 Baud. It is not possible to define a separate baud rate for the input or output, the defined baud rate is set for the input & output in parallel.
The device can be configured and firmware updates downloaded using a microSD card slot. No special software is needed for this! Only a device (laptop, PC, smartphone), a microSD card (not included) and a text editor are required.
During configuration, you can, for example, change the baud rate for AIS data to 38,400, 9,600 baud for Navtex data or for faster data transmission to up to 115,200 baud. Filters can also be set to block data sets that should not be rendered. There is a blacklist (block before rendering) and a whitelist function (only render these data sets).
Instructions for changing the baud rate:
- Insert an empty Micro-SD card into the corresponding card slot of your computer.
- Next step is to create a text file (TXT) and save it on the Micro-SD card. Do this as follows:
- Open the editor. Depending on the Windows version, this can be carried out via the Start menu -> Windows Accessories.
- Now enter the following line in the editor:
0183_SPEED=x
Where the x represents the respective baud rate.
For configuration with 4800 baud (e.g. for GPS, wind, depth or compass data) the command is as follows:
0183_SPEED=4800
For configuration with 38400 baud (e.g. for AIS data) the command is as follows:
0183_SPEED=38400
- Now save the text file via "File -> Save" under the following names on the Micro-SD card
YDNG.TXT
- Remove the Micro-SD card from the card slot of your computer and insert it into the Yacht Devices Converter. You can now use the Converter with the baud rate you have set.
Note: a second colour scheme has been used by the manufacturer since 2024. Unfortunately, the current scheme is still indicated on the housing label of the device. The old colour scheme #1 is used in the manual.
The conversion is as follows:
| NMEA0183 Signal | RX+ (IN A) | RX- (IN B) | TX+ (OUT A) | TX- (OUT B) | GROUND |
|---|---|---|---|---|---|
| Colour scheme #1 | YELLOW | BLUE | RED | BLACK | CLEAR |
| Colour scheme #2 | YELLOW | GREEN | WHITE | BROWN | GREY |
Technical specifications:
- Current consumption via the SeaTalkNG network: 30 mA
- Voltage range: 7-16 V
- Cable length: 400 mm
- Housing length without connections: 54 mm
Documents
Manual
PDF (1,81 MB)
Product safety
Reply from YACHT DEVICES
What exactly is not working for you?
Customers ask customers
Technical question
Michael O.
| Jul 17, 2021
Moin, der Konverter ist da und Dank der Infos hier auch Alles wie beschrieben gemacht: 16GB SD Karte mit FAT16 und die vom Konverter zurückgeschriebene Konfigurationsdatei sagt 0183_SPEED=38400 (für AIS wie gewünscht). Nur kommt aus dem Konverter nichts beim Plotter an (gefunden hat er Ihn). Der Konverter macht nach dem Einschaltvorgang ein stabiles LED-Signal: grün, rot, rot, rot, grün, grün - entsprechendes finde ich aber nicht in der Beschreibung. Hat Jemand eine Idee? Danke und handbreit, Michael
Answer
Simon P.
| Jul 18, 2021
The PDF manual I downloaded says this: "During normal operation, Device produces a series of five flashes every five seconds. The Flashes indicate the state of Device interfaces over the last five seconds and have the following meaning: • Flash #1. GREEN if data is received from the NMEA 2000 interface, otherwise RED. Note that filters and other Device settings do not effect this signal. RED usually indicates problems at the level of the physical connection. • Flash #2. GREEN if data transmitted to NMEA 2000. This signal may be RED if nothing was received from NMEA 0183, or conversion was prohibited by the filter settings (see Section VI). • Flash #3. GREEN if data was received from NMEA 0183 interface. A RED signal may indicate the incorrect speed of the NMEA 0183 port or problems with the physical connection. • Flash #4. GREEN if data was transmitted to NMEA 0183. As there is no confirmation of reception, this signal does not mean that data was received by any listener. RED means that Gateway has nothing to send, because nothing was received from NMEA 2000 or conversion is prohibited by filters (see Section VI). • Flash #5. GREEN if no checksum error found in incoming NMEA 0183 messages (only messages not blocked by filters are verified). This signal is also GREEN when nothing is received from NMEA 0183 at all." Hope this helps...
Comparison
Availability / Price
Item no.
90292
90291
Customer ratings
Description
Yacht Devices - SeaTalkNG to NMEA0183 converter
Yacht Devices - NMEA2000 to NMEA0183 converter
NMEA0183
NMEA2000
WiFi
USB
SeaTalk 1
NMEA0183 Baud Rate
300 - 115200 Baud
300 - 115200 Baud
AIS Support
Operating voltage
12 V
12 V
SeaTalk NG
Cable length
400 mm
400 mm
Customers also bought
BAVARIA
Boarding Railing Bracket V4A / CRUISER , B/ONE , EASY9.7
only
€94.95
BAVARIA
Stanchion V4A / CRUISER , B/ONE , EASY9.7
only
€36.95
BAVARIA
Helmsman Seat Base
only
€60.95
BAVARIA
Hinge for Access Doors & Table Tops / 38.5 x 38.5 x 75 mm
only
€9.95
BAVARIA
Trim Plate for Skirting Board
only
€57.95
BAVARIA
V4A Screw for Railing
only
€1.20
BAVARIA
Lock for Access Door DIN Left
only
€63.95
BAVARIA
Stanchion Base for Rail Track / from 2001
only
€89.95
BAVARIA
Spacer for Rail Track
only
€119.95
Similar items
-11%
YACHT DEVICES
NMEA2000 to NMEA0183 Converter
€213.66
only
€189.95
7
YACHT DEVICES
NMEA2000 USB Gateway
only
€309.95
8
AMEC
NK-80 Network Adaptor
only
€254.95
2
-13%
YACHT DEVICES
NMEA2000 WiFi Gateway
€281.49
only
€244.95
39
YACHT DEVICES
SeaTalkNG WiFi Gateway
only
€294.95
13
NEW
YACHT DEVICES
SeaTalkNG Ethernet Gateway
only
€244.95
3
NEW
YACHT DEVICES
NMEA2000 Ethernet Gateway
only
€244.95
8
-11%
ACTISENSE
NGX-1-ISO NMEA 2000 to NMEA 0183 Adapter
€278.02
only
€246.95
9
-11%
ACTISENSE
NGX-1-USB NMEA 2000 to USB Adapter
€297.00
only
€262.95
14
-8%
ACTISENSE
NMEA2000 to WiFi Converter / W2K-2
€307.54
only
€283.95
10
Last seen products
-16%
LENCO
Electric Dual Trim Tab Kit / without GPS Antenna And Network
€2,363.91
only
€1,979.95
1
-13%
SANIMARIN
31 LUXE On-Board Toilet / sea water / 24 V / low
€1,207.52
only
€1,049.95
4
LEWMAR
Top Cap and O-ring Set for EVO ST 50
only
€16.50
2
-33%
QUICK
Bow Thruster Set BTQ 125-40 / 12 V / 2.2 kW / 40 kgf
€1,869.49
only
€1,249.95
2
Spade Connector Male / blue / 1.5 - 2.5 mm² / pack of 20
only
€3.40
67
-7%
ENO
Pot Holder Tongs 190 mm / right-sided
€19.30
only
€17.95
TECHIMPEX
MARINER Stainless Steel Gas Stove (DELUXE) / 2 burners
only
€1,279.95
NEW
VAKAROS
Multifunctional Instrument ATLAS EDGE
only
€729.95
E-mail Newsletter
Product news, offers & new guide videos. Stay up to date!
WhatsApp
New: Get news from SVB straight to your phone!