SIMARINE PICO + System Monitor / surface mount, black

The SIMARINE PICO+ is one of the most innovative on-board network monitors on the market in terms of technology and design and adds another high-quality system monitor to the SIMARINE PICO range (PICOone, PICO Standard and PICO Blue-Set). PICO+ is supplied without shunts/measuring modules and can be expanded as required with all active SIMARINE shunts and/or measuring modules. PICO+ contains a barometer with precise information about the air pressure, current weather developments or a graphical history up to 3 days.
With the respective shunts/measuring modules it can monitor up to 6 battery banks (lead/acid, GEL, AGM or LiFePO4, 12 or 24 V), 6 additional battery voltages, 14 tank levels and 20 consumer or generator currents and has extensive alarm functions.
The SIMARINE app (iOS/Android) displays all measured values on your smartphone and is useful for convenient programming of basic settings. PICO+ can, of course, also be operated via 4 touch keys on the display itself.
Innovative SIMARINE BUS technology makes installation child's play. Simply connect PICO+ to a small data splitter via a thin cable. The splitter is connected to a 12 or 24 V DC and provides the display with operating voltage. Shunts & measurement modules are connected to the splitter via 5 m long data lines (supplied with the shunt/measurement module), but can also be connected from shunt/measurement module to shunt/measurement module. An extension cable is optionally available.
The waterproof housing (IP67) can be mounted on any flat surface. It is fastened at the rear using four M3 threaded bolts and knurled nuts. Dimensions: 97.5 x 83 x 10 mm, colour: matt black. Delivery includes: display, data splitter box, mounting material.

Example of use
The ST107 module alone can be used to provide a very precise display for several tanks. The module contains 4 resistance measuring inputs (0-65 kOhm), suitable for almost all common tank sensors (10-180 Ohm, 240-33 Ohm, 0-190 Ohm, etc.) as well as 3 voltage measuring inputs e.g. for the BEPMARINE TS1 ultrasonic tank sensor (this must be programmed to 0-5 V output signal). With up to 11 programmable calibration points, the levels of asymmetrically shaped tanks can be displayed very precisely, which is not possible with the usual tank displays.

PICO + is delivered without shunts or measuring modules.
You can choose here the correct shunts, measuring modules and other accessories for your needs.

Shunts, measuring modules and accessories

Type	Range of functions	Manufacturer #	SVB Item #
SC303	300 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included.	S001	25502
SC503	500 A shunt, detects 2x voltage, (battery) 3x resistance (of which 1x battery temperature sensor), DC cable, temp. sensor, 5 m SIMARINE data cable and mounting material included.	S002	24412
SC302T	300 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor)	S005	24411
SC502T	500 A shunt, additionally measures 2x voltage (including 1x for battery), 2x resistor measurement (including 1x for battery temperature sensor)	S006	25503
ST107	Tank & temperature measuring module, measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistor (for tank or temperature sensors), 1x neutral alarm changeover contact (loadable max 1 A, 30 V)	T001	24413
SCQ25	Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), 1x neutral alarm changeover contact (maximum load 1 A, 30 V)	S003	24414
SCQ25T	Active 4-way 25 A shunt (individual shunts can be connected in parallel and the measured values can be added or subtracted via the software), additionally measures 3x voltage (eg for tank sensors with DC output signal such as BEPMARINE TS1, 4x resistance (for tank or temperature sensors) , 1x neutral alarm changeover contact (maximum load 1 A, 30 V)	S004	24415
TS01	NTC temperature sensor 10 k, 1%, waterproof, cable length 1 m	TS01	24381
TS02	NTC temperature sensor 10 k, 1%, waterproof, cable length 5 m	TS02	24382
DC02	Data cable extension 8 m, incl. RJ10 connector (socket / socket)	DC02	24383
SKU	Elastic cover for PICO body, blue	C001	25504
SKU	Elastic cover for PICO body, black	C002	25505
	Acoustic & optical signaling devices for shunts / measuring modules with alarm contact
	Acoustic alarm, surface mounting, 12 V DC		23403
	Acoustic alarm, surface mounting, 12/24 V DC		27864
	Acoustic alarm, flush-mounted, 12 V DC		24113
	Acoustic alarm, flush-mounted, 24 V DC		24127
	Control lamp red, flush mounting, 12 V DC		46704
	Control LED red, chrome-plated, flush-mounted, 12 V DC		24323
	Control LED yellow, chrome-plated, flush-mounted, 12 V DC		24324
	Control LED green, chrome-plated, flush-mounted, 12 V DC		24322
	Control LED blue, chrome-plated, flush-mounted, 12 V DC		24325
	Control LED red, chrome-plated, flush-mounted, 12/24 V DC		46049

Please note

• The PICO + can not be used as a second display (2nd control station) for an existing SIMARINE-PICO system monitor.
• PICO+ includes a barometer. There is a small opening / diaphragm on the back of the housing. In order for the barometer to work properly, a corresponding hole must also be made in the mounting surface to match this opening.