

MASTERVOLT MLI Ultra 1250 Lithium Battery
incl. CombiMaster 12/2000-60 (230 V) & EasyView 5

Maximum operational reliability in perfect balance with this set from MASTERVOLT - future-oriented lithium technology that you can rely on. The MASTERVOLT MLI Ultra is a lithium power pack with a capacity of 100 Ah (at a voltage of 12 V). With LiFePO4 chemistry and high-tech BMS, MASTERVOLT guarantees the best possible standards in terms of safety, whilst maintaining the high quality the company is known for.
Note - Installation of the 230V inverter connection should be carried out by a specialist company.
Features
The advantages of MLI Ultra 1250 lithium technology
The Perfect Match
In combination with the MASTERVOLT CombiMaster 12 V / 2000 W / 60 A, not only do you benefit from maximum performance, but also the highest possible safety for your lithium system. Using the MasterBus interface to connect your MASTERVOLT MLI 1250 Ultra and the CombiMaster charger/inverter is the best way to charge your battery and increase its life span at the same time. When the MLI Ultra and Chargemaster charger are connected via the MasterBus interface, the CombiMaster can automatically apply the best settings for the battery in real time depending on the current situation.
Installing a lithium-ion battery has never been easier. Hook up your MLI Ultra 1250 to the MASTERVOLT CombiMaster unit and connect the two units using the MasterBus interface and the battery will automatically fully configure the CombiMaster unit with the ideal settings for the battery, making your charging experience hassle-free and avoiding the need for configuration tools.
Thanks to the NMEA2000 interface (micro-C connector), the MASTERVOLT MLI litihum battery can be quickly and easily integrated into an existing NMEA2000 network. With compatible devices, you can retrieve data from the battery at any time.
View a range of information on the SmartRemote display via the MASTERVOLT CombiMaster using the MasterBus interface. Display key parameters, such as current supply, the power of the charger, as well as the voltage and temperature of the connected batteries.

Compact charging & conversion

CombiMaster 12 V / 2000 W / 60 A (230V)
Everything in View
EasyView 5 Display
Controlling your Mastervolt system has never been easier thanks to this waterproof system monitor, which features a 'daylight-readable' display and an intuitive touchscreen. EasyView 5 features a sharp, waterproof display which is clearly readable in daylight. Thanks to the colour touchscreen and multi-language menu, the display is a pleasure to operate. Easily customisable favourite pages show all relevant system information at a glance.
Alarms & logs - No surprises! The EasyView 5 helps to keep your system in top condition by assisting you with alerts. Logging of the alarms provides valuable insight in the operation of your system.
Features

Technical specifications:
MASTERVOLT MLI 1250 Lithium Battery
| Specifications / technical data | ||
|---|---|---|
| General specifications | ||
| Battery chemistry | Lithium Iron Phosphate, LiFePO4 | |
| System voltage | 12 V | 24 V |
| Nominal voltage | 12.5 V | 25 V |
| Capacity | 100 Ah | 50 Ah |
| 1250 Wh | ||
| Cycles | 3500 cycles at 80 % DOD at 25 ⁰C | |
| Self-discharge | < 3 % / month | |
| Parallel / series connection | Battery banks (clusters) can be assembled from up to 2 or 4 identical batteries, system voltage max. 48 V. Mixing 12 or 24 V MLI Ultras is not permitted. Parallel / series connection with lead-acid types is not permitted! |
|
| Charge / discharge | ||
| Charge characteristic | 3-stage CCCV (IUoUo) | |
| Max. charging voltage (Bulk/Absorption) | 14.25 V | 28.5 V |
| Final charging voltage (Float) | 13.5 V | 27 V |
| Max. cont. charging current | 100 A (1 C) | 50 A (1 C) |
| Recommended charging current | ≤ 50 A (0.5 C) | ≤ 25 A (0.5 C) |
| Continuous discharge current | 100 A (1 C) | 50 A (1 C) |
| Max. discharge current 3-5 minutes at ≥ 25°C |
200 A (2 C) | 100 A (2 C) |
| Peak discharge current 10-15 seconds at ≥ 25°C |
500 A (5 C) | 250 A (5 C) |
| Discharge cut-off voltage (temperature > 0°C, discharge current < 1 C) |
10 V | 20 V |
| Operating conditions | ||
| Nominal operating temperature | 25 °C | |
| Operating temperature range | -20 to 50 °C | |
| Note on temperature during charging | If a charger is connected and the battery temperature is below 0 °C, the internal heater switches on until 5 °C is reached or the charger is disconnected. It takes about an hour for the battery to warm up from -20 °C to above 0 °C. Charging at temperatures < 5 °C may result in the battery not being charged, and the charging current being used to heat the cells first. Temperatures below 5 °C and above 25 °C can affect the service life and the number of charging cycles. |
|
| Storage temperature | -20 to 55 °C | |
| Relative humidity | 10 to 95, non-condensing | |
| Features | ||
| Battery monitoring / BMS | Integrated | |
| (Safety) disconnect switch | Integrated, also can be switched manually | |
| MasterBus-connection | Yes | |
| MasterBus power supply option | Yes | |
| CZone / N2k compatibility | Yes | |
| Waterproofing | IP65 | |
| Certification | CE, E mark | |
| Mechanical properties | ||
| Battery connection | M8 threaded blind holes or conical SAE car battery pole adapters (included) | |
| Installation position | upright (recommended) or lying on the longest side |
|
| Dimensions LxWxH without / with car battery pole adapters and carrying handle |
330 x 173 x 210 / 228 mm | |
| Weight: | 15 kg / 33 lbs | |
| Connections | M8 threaded blind holes or conical DIN/EN car battery terminal adapters, tightening torque 14.7 - 19.6 Nm |
|
| Installation position | Upright (recommended) or lying on the longest side |
|
Technical specifications:
MASTERVOLT CombiMaster 12V / 2000W / 60A
| Nominal voltage | 12 V (10.2 to 16 V) |
| Output voltage | 230 V |
| Output frequency | 50/60 Hz (configurable) |
| Continuous output | 2000 VA / 1600 W |
| Peak performance | 3000 VA / 2400 W |
| Surge power | 4000 VA / 3200 W |
| Input voltage range | 170-280 V |
| Max. input current | 6 A (adjustable) |
| Max. charge current | 60 A at 14.25 V (configurable) |
| Temperature sensor | Yes |
| AC input | 25 A |
| AC output | 33 A |
| AC input fuse | Yes |
| Transfer speed | 10 ms |
| Display | LED display |
| Dimensions (h x w x d) | 371 x 284 x 155 mm |
| Weight: | 6.9 kg |
| Charge characteristic | UoUo, automatic / 3-step+ for flooded, Gel/AGM and MLI |
| Recommended battery capacity | 180-500 Ah |
| Temperature range | -25 to +60 °C |
| Cooling | Vario fan |
| Waterproof | IP23 |
| MasterBus compatible | Yes |
| CZone / NMEA 2000 compatible | Yes |
Technical specifications:
MASTERVOLT EasyView 5
| Power supply | MasterBus powered, or 12/24 V input |
| Resolution | 480 x 272 pixels |
| Colour depth | 16 bits |
| Display | 4.3 inch high contrast display with capacitive touch control |
| Languages on display | English, Dutch, German, Spanish, Italian, French, Finnish, Swedish, Norwegian, Danish |
| Installation | Front mount, wall mount and MasterView Easy retrofit |
| Dimensions (h x w x d) | 113 x 127 x 43 mm 4.4 x 5.0 x 1.7 inch |
| Weight: | 0.315 kg 0.7 lb |
| Alarms | Integrated buzzer |
| Included in delivery | UV protection cover |
| MasterBus-connection | Yes |
| power consumption | < 160 mW (idle mode) |
| Connections | 2x MasterBus, USB, 12/24 V |
| Level of protection | IP67; waterproof front |
No questions asked yet. Be the first to ask a question!
More "Customers ask customers" available in the following languages
Product news, offers & new guide videos. Stay up to date!
New: Get news from SVB straight to your phone!